Contenu récent par Barracuda

  1. B

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Hello @rafikemd, I have already mounted the radar on the car, but it is not connected yet. How did you connect it electrically?
  2. B

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Hello, I also have thought about installing the radar to my Opel Corsa F (which it, sadly did not had from the start). But it also involves adding wires (because the connector was not present in my case). If you buy a radar with 2 CAN-buses it involves also adding (splicing) existing CAN wires...