Contenu récent par chunchai

  1. C

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Bonjour, Anyone could provide me the configruation of CIROCCO for 5008 with NAC ? expecially, 2100 Thank a lot :coucou:
  2. C

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    I think he is meaning that you can use arduino tools to set BSI 234C again. 01->00->01 FYI,hope it could help you
  3. C

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    I thought it may be a system bug, my friend has the same issue happened. I had once.
  4. C

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    BSI D535 :CODE UCE CAN CAFR (Commutateur Automatique Feux de croisement Feux de Route) - Smart Beam D524 :CODE UCE CAN Capteur Angle Volant (CAV) D536: CODE UCE CAN Camera Multi Fonction (CMF) - Camera Video Multi Fontion (CVM) 242F : Option liant LKA et BSD 244C: Type de Lane Assist CVM2 2100...
  5. C

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Yes, I have tried this code to disable STT successfully on Peugeot 2008P24/308T9/3008P84/5008P87/508R8 Citrone C4P/C4GP/Berlingo OPEL Mokka/Astra But I am not using arduino tool for this purpose, I use the clone diagnostic tool from China , It's the same just a different tool. Do you have a...
  6. C

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Could you help to check it's workable now after you did this configuration?
  7. C

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Actually , I also want to know this. Now I just ignore this icon on my dashboard .
  8. C

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Thanks for @afu1986 to provide me the hint. I try to change the type of car form unknow-4 to new 2008 of Dashboard 2100 item. The arrow icon has be showed . @VLud @JonnyMnemonic Very apprecaite your guideline ,I follow your step to try serval times but it's still not working for me. The...
  9. C

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Try this >6A8:688 1003 disable 3101DFC702 enable 3101DFC700
  10. C

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Hi Jonny I have the same problem with you You can try this 2100F4C0A29C000000000000000D6600800A0000A035002024 23008808FC0053BB82FF00 Then you can enable NAVI on your dash board FYI, hope it could help you . Thanks /Nick
  11. C

    NAC WAVE 4 TO IVI

    I am sure that the 2024 model 2008 is using IVI system and BSI 2010-EV Citroen C4 new model is the same too. I bought an IVI from China guys for research but I have not found any method to migrate it. I got the info there are two kind frimware of IVI head unit. NHM version is for VSM . AHM...
  12. C

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Bonjour, Very appreciate all guys to provide so much great info here. I tried to update my Peugeot 2008 P24 head unit from RCC to NAC serval days ago. I met two issues 1. At begining, I could not enable NAVI screen on my 3D speedometer using vlud for 2100 and 2300. I forgot to modify which...