Contenu récent par deveb

  1. D

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Try to prepare commands to send them one by one, as quick as you can. If there is too long time between commands it could be a reason of failure.
  2. D

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Have you tried to disable all electric/hybrid car options in cirroco?
  3. D

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Hi, is there any setting so that LKA will not be automatically blocked from use when attaching a trailer? I use a hook-mounted bicycle carrier and it's a pity that then the use of LKA is not possible...
  4. D

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Leaonardolb, there are no words worth enough to say thank you! With information you shared, I got rid of my doubts with parameters and I was able to succesully enable HBA and LKA on CVM2.
  5. D

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Hello everyone First of all, thanks for great work! Many of my questions were already answered in this thread so I didn't had chance to wrote anything, but this time I was unable to find one thing: What are possible configurations for cvm_2? i.e. which part of data is responsible for each...