Contenu récent par domz

have you already tried to write the engine ecu with the vd56 json?

I have the 1.2 puretech with bsi EI4, I set acc like this, with json cmm_vd56. Then I activated it in bsi, cockpit 3d, esp mk100, radar av4, cvm 3, dae uds and in ivi (mounted recently). I have manual gearbox

https://it.aliexpress.com/item/1005007703643225.html?spm=a2g0o.productlist.0.0.52ca7aefFY8dhg&mp=1&pdp_npi=6%40dis%21EUR%21EUR%2011.69%21EUR%2011.69%21%21EUR%209.69%21%21%21%402103891017694086585593629efe3b%2112000041916267746%21ct%21IT%212639201561%21%211%210%21&gatewayAdapt=glo2ita

I have the MG1CS032 engine control unit, on pypsadiag with the json for the vd56 ecu I managed to activate ACC, having activated everything I don't receive errors when I use it and I didn't have to change any ecu

Hi, has anyone managed to activate the automatic high beams and parking sensors button on ivi ?

Hi, the rear view cameras simply needed to be calibrated. Having lost the NAC from a 3008, the calibrated dimensions were different.

Hi Manuel, I also have the app disconnected from the vehicle, can I ask you how you solved the rear camera display?

I have version 9.186, is it up to date enough for 208?

diagbox doesn't show me the configuration ivi, it only lets me choose between nac and rcc

@joan carlos did you change anything in the double canbus sketch?

My sensors are working fine. Is it possible that they were already calibrated correctly for the car that was previously installed there? Is it normal that without calibration the camera is not visible at all? It's as if it were not connected.

Thanks jeverds, I managed to do everything else, but I just don't know how to do this

If it's not a problem for you, could you explain to me how to do it?

Thanks, I managed to activate it, but even if the camera is connected the image does not appear, even if I activated the video input

so the machine's CAN must enter one card and exit the other going towards ivi and bsrf right?