Contenu récent par eptcb

Vlud again, your project its great produce and open things to life! for sure let us play with that to make it in full house like beta testers. and without you itll never hapen:)

yes my rt6 is CAN2004 , but want to connect it to the upgrade color DOT MATRIX CAN2010 . my car is RCZ 2011 1. finnaly i got it half working! i find that your 17.10.2020 Arduino-Psa Adapter.ino file (EnableDisable CAN2004 Language change listening) work for the Compass , after that version all...

i test now without the convertion and the compass working, also connect to the mono screen and all working the Radio and the Compass, so something with the software convertion

hi, i'm deep in this project , all working but.. nowdays i replace the EMF-C to RT6+DG4 Screen , also prallel with android headunit, i have install before the color Dot screen with the bsi2004 to 2010 conversion now i can see the compass but strage - its blinking - half sec of rt6 input and the...

i do the conversion 2004bsi to 2010bsi and use that for peugeot RCZ for color Dot Matrix screen 1. i flash enable bits for all things that i need and it work. 2. i bulid harnsess for "navigation control unit" but it didnt work at all i change for mono screen and connect Daigbox and enable this...

I fix it

The adapter is working now but: 1. There is exclamation mark in the right instrument cluster . When i remove the adapter it disappeared. 2. The fuel per km not show its empty. Only one time i see it work

this what we made:

pepole can you share some info and pictures who have this work ? we have here in Israel and Brasil pepoles that would like to do it but with no luck... Vlud is the only one who i know made it possible but he is bussy this time, we need to know the basic because somthing is worng and we dont know...

Can you post pictures of that adapter. How you connect it.cause it didnt work, i think its something with the program that upload to the device, i read there are some canbus shiled that use d10 instead d9

Where i can found pictures or diagram of all connection of that special project i search on net but nothing.... there are CAN-BUS Shield as Master and Slave that connect between their Terminal - CAN_H and CAN_L - IS IT LIKE THIS? Only you VLud make it possible! is the picture i attached is ok ?:

Is it right ? sorry i'm new to Arduino :

thanks for replay! i buy Phonocar 4/790 as for step 6 , what it will help me ?

Hello, I have RCZ 2011 with large LCD I want to make LCD Matix color in the dashboard, What do I need to connect to the screen? I order all the parts in the list WhatsApp Image 2019-11-23 At 12.18.40 de eptcb posté le 24 Novembre 2019 à 01:56WhatsApp Image 2019-11-23 At 12.16.08 de eptcb posté...