Contenu récent par FSB

Hi Vlud, Regarding this issue of Diagbox "blocking" use with another VIN, I am using an older version (9.115) that does not have this "block", but apparently despite not having the block, now the Diagbox/PSA Server does some checking if the manually entered VIN is different than it was read...

Hello VLud ... I'm still trying to activate the connected services ... my brother has a 308 I year 2012, equipped with the RNEG / RT6 system, which I suppose is possible to change the VIN at BSI. You said to use the SMEG to NAC adapter, but for this I also have to remove the NAC and capacitive...

Hello. I also bought the CPLAY2air adapter. Too bad when I bought it I didn't have this promo code :mad: Works great, better than I expected and so far I haven't noticed any bugs. https://flic.kr/p/2iK5Tsp https://flic.kr/p/2iK7uB1

Hello VLud, I recently replaced my RCC that originally came on my Peugeot 3008 with NAC, following your great tutorial. Everything is working perfectly, but compared to RCC, I think NAC is extremely slow. For example, when reversing, the image of the rear camera immediately appears, but the...

I found out what was missing. It was the telecoding of parking assistance calculator, just activating the semi-automatic parking function that worked perfectly.

Hello Vlud. In my case I have the side radars, I did the NAC telecoding, and after the telecoding the "parking assistance" menu appeared, but when selecting the option nothing happens. I did not find any parameters in BSI to be activated. Do you know what may be happening?

As for the wires from the inside to the outside, in my case there was already a harness that goes from the red 22-way connector near BSI to the outside (near the front bumper) to black 10-way connector. You can verify that yours has too by removing the front fog light (right side), and inside...

Hi Abiran, To install the camera on the front bumper you will first need the camera, the connector (I bought it on Aliexpress, as indicated in the Vlud tutorial), the bracket (1617977480), the camera trim (1617977380). The hardest part is removing the front bumper to install the camera. After...

I did the initialization with Diagbox and now it is working perfectly. But I still have a doubt. Is it possible to activate the front camera every time the front sensor detects an obstacle?

Hi Vlud, I just installed the visiopark 2 calculator. I connected Diagbox to telecode, but there is no option to telecode the visiopark 2 calculator, just telechargement. Do you know what is the difference? Another point, after I telecode the driver assistance options in the NAC, the rear camera...

You are the best. Thank you.

That is, I will not be able to activate the connected services. Thank you so much for your support.