Contenu récent par g-luka

  1. g-luka

    [TUTO] Adaptateur pour SMEG/NAC/Matrice CAN2010 sur BSI CAN2004

    Hi, if can help here there are 2 traces from my C4, one with engine running and one with engine off.
  2. g-luka

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    It's strange because it happens with all files... included files that I have already uploaded in the past in the same unit...
  3. g-luka

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Hi, after a long time I tried to change the calibration of my NAC to check some improvements, but it doesn't goes on. It starts to download and then stucks. I tried multiple times but it arrives max at 36% and then stops. Someone had the same problem? Any solutions? Thanks.
  4. g-luka

    [TUTO] Adaptateur pour SMEG/NAC/Matrice CAN2010 sur BSI CAN2004

    Ah, very nice! Sorry, I thought it was these: :D https://www.amazon.it/Arduino-Mkr-Can-Shield-ASX00005/dp/B07HNKCDCN/ref=sr_1_2?__mk_it_IT=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=arduino+mkr+can+shield&qid=1616000994&sr=8-2
  5. g-luka

    [TUTO] Adaptateur pour SMEG/NAC/Matrice CAN2010 sur BSI CAN2004

    Please, if someone have a full dump of CAN confort from a CAN 2010 car with engine running and can post it would be very appreciated... I'm still searching for some ID's to control a few warning lights on DS5 dashboard. Many thanks.
  6. g-luka

    [TUTO] Adaptateur pour SMEG/NAC/Matrice CAN2010 sur BSI CAN2004

    Sure! Do you want a full dump of my car? Haha you win! But these boards are still too expensive for me o_O
  7. g-luka

    [TUTO] Adaptateur pour SMEG/NAC/Matrice CAN2010 sur BSI CAN2004

    Hi all! in order to miniaturize the interface I was searching for something not so big and possibily not working at 8mhz... and finally I found on Amazon this interface: https://www.amazon.it/gp/product/B08CRMX3D1/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 It's designed for Raspberry but...
  8. g-luka

    [TUTO] Adaptateur pour SMEG/NAC/Matrice CAN2010 sur BSI CAN2004

    Hello you all! finally I completed my installation of NAC on my C4 VTS and this is the result. I'd like to thank @VLud for his inestimable work! Almost all works perfectly. I choosed to fit one dedicated fmux to avoid troubles with che control of the multifunction display. By now the only thing...