Contenu récent par Georgio 3008

  1. G

    [TUTO] Remplacer la caméra de recul 130° par la caméra panoramique 180° (Visiopark 1) sur 308

    Hello VLud, sorry to coming to you again regarding 180° reversing camera issue on my 3008 (P84) MY2018, because after coming back from dealer after interview with the technician, who tried to install the camera 4 weeks ago, I have some additional information. 1) Regarding wiring: Wire harness...
  2. G

    [TUTO] Remplacer la caméra de recul 130° par la caméra panoramique 180° (Visiopark 1) sur 308

    Thank you VLud :bien: Basiclly you do not see the reason why it shouldn't work and this sounds good for me.
  3. G

    [TUTO] Remplacer la caméra de recul 130° par la caméra panoramique 180° (Visiopark 1) sur 308

    Which one negativ video PIN - in camera or in RCC/NAC? Thank you, VLud. What do you mean about the retrofitting set and by me used harness from the above mentioned set? EDIT: Might be this image behavior related to my RCC unit?
  4. G

    [TUTO] Remplacer la caméra de recul 130° par la caméra panoramique 180° (Visiopark 1) sur 308

    I took the retrofitting set of reversing camera which is originally made for Citroen C5 Aircross - set no. ‪1647580180‬. If you will have a look in to SERVISBOX you will find it including the assembly manual and way of connection. Part of this set is also harness, which they used, to connect...
  5. G

    [TUTO] Remplacement SMEG+ par un NAC Wave2 sur 308 T9 (+ BTA 2.0)

    Hello, The reversing camera has been mounted and activated, however the image on the central monitor is somehow interference :crazy::spamafote: The videos are uploaded under the link below, it is the last conversation...
  6. G

    [TUTO] Remplacer la caméra de recul 130° par la caméra panoramique 180° (Visiopark 1) sur 308

    Hello, The camera has been connected and activated, nevertheless the service reported to me some interference issue on the monitor. It looks like I am facing the same problem like user Tor13 was reporting above. The connection/wiring will be double checked. Do you have some other ideas what...
  7. G

    [TUTO] Remplacer la caméra de recul 130° par la caméra panoramique 180° (Visiopark 1) sur 308

    Next week I have got finally the term for reversing camera installation to my 3008 P84 at my local Peugeot dealer. My local dealer is also open to make the activation of reversion camera with Diagbox. Now I need only to prepare for them some easy manual how to this. New VIN code which is...
  8. G

    [TUTO] Remplacement SMEG+ par un NAC Wave2 sur 308 T9 (+ BTA 2.0)

    Thank you for good news :bien:
  9. G

    [TUTO] Remplacement SMEG+ par un NAC Wave2 sur 308 T9 (+ BTA 2.0)

    Hello, I verified the VIN from adopted car in ServiceBox (section interior fittings) and I can find the comformity except of feature related to radio receiver. My is anlog connected colour radio and adopted is digital connected colour radio. All other features like Wi-Fi, Mirror Link...
  10. G

    [TUTO] Remplacement SMEG+ par un NAC Wave2 sur 308 T9 (+ BTA 2.0)

    Thank you very much VLud for your fast feedback. Where I could find AAS green socket (BSI 1 or in boot)? I will have a look if the access to this socket will be easier rather than PH Black. I have already found some VIN of car with factory fitted reversing camera. Does it matter if the RCC is...
  11. G

    [TUTO] Remplacement SMEG+ par un NAC Wave2 sur 308 T9 (+ BTA 2.0)

    Hello, I am here new and sorry for english laungauge. Hope it not an issue for you. I would like to thank to VLud user for lot of valuable infromation inside of this thread giving me courage to this action. I am the owner of 2018 Peugeot 3008 Allure. Unfortunatelly I have forgoten to...