Contenu récent par GILSON TEIXEIRA DA SILVA

  1. G

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    68D 6AD 2E:2101:28:EE 68D 6AD 2E:2101:29:7A >6AD:68D 222101 622101... unlock 2E2101????????? And when we have two different values in the same zone, how is the writing?
  2. G

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    @pepelxl The other zones I already made the change (23C8 and 231D in BSI). But I couldn't find which ESP zone I make the change you showed. Can you help me with this? The value you already informed but I don't know which zone I make the change.
  3. G

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    @infizer91 If you can share ESP81 it will be very important to us. Thanks again for what you've already shared here on the forum. I've already gotten a few things with your information.
  4. G

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    @pepelxl The only information I have is that it is inside that ECU: >6AD:68D
  5. G

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    @infizer91 Thank you for sharing. And it's really easy to understand what you shared for the Arduino pattern. Do you have the ESP90 like that too? Is it possible to share with us? There are things that are only available on ESP 90. Thank you very much.
  6. G

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    @VLud @kokovi4 @pepelxl or anyone who can help What is the zone of this command marked in the image?
  7. G

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    @pepelxl , That's not the feature we're looking for. Do you know in which ECU and in which zone it is possible to decrease the activation speed of the ACC? It only accepts to be activated from 30 kml/h.
  8. G

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    It's not exactly stop and go. But if it is possible to activate the ACC at zero km/h or 1 km/h, it makes it a lot easier.
  9. G

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    All minimum values. These values working, we have a stop and go.
  10. G

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Has it worked for anyone to change these speeds? Here it does not change. This RCC
  11. G

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

Voir plus
Haut Bas
Back