Contenu récent par Hallahub

  1. Hallahub

    Changement NAC wave 2

    Ah, everything is clear now :D
  2. Hallahub

    Changement NAC wave 2

    I agree with you, I am more expensive than you Anyway I don’t remember we had any deal in the past. :(
  3. Hallahub

    [TUTO] Remplacement SMEG / SMEG+ par un NAC Wave2 sur 208 A9 / 2008 A94

    https://a.aliexpress.com/_ExA4f4r You don’t need to make one, just buy this. Easier ;)
  4. Hallahub

    IVI - DS7 Mid-life on BSI2010EV

    It’s not a mid life VIN, as you work in peugeot you should know that a “JY” VIN is a 2018 ds7 :)
  5. Hallahub

    IVI - DS7 Mid-life on BSI2010EV

    Better to wait an IVI already from an AEE2010 car. Anyway the actual 10” screen from nac works just fine, Its only needed to adjust the display type inside IVI itself. Can you give me the ds7 crossback mid life Vin in private? I want to study some schematic
  6. Hallahub

    IVI - DS7 Mid-life on BSI2010EV

    Hi, the source is coming directly from you? We already knew IVI would have been retrofitted on other cars like 508 and 208 mid life without any change to electric architecture but our testing unit was running on NEA2020 and it wasn’t 100% compatible with AEE2010. The Ivi has 2 pins for canbus...
  7. Hallahub

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    The new ds4/308 uses a different infotainment system, the cameras now are in digital format running on a fakra plug, no more analogic signal like NTSC/PAL that we used to see on the nac. Edit: from a certain OPR they switched from NTSC/PAL, since on your car you have a dedicated Ecu to manage...
  8. Hallahub

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    No one believes you, do not waste your time writing long messages as they will be ignored, time is precious;)
  9. Hallahub

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    9820656780, you can find it new on ebay for 250.
  10. Hallahub

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    why would arduino ever crash? We’ve been using arduino and 2 canbus shields to make NAC works on can2004 cars without any problem. It’s been almost 2 year I use arduino on citroen c3 mk2 without any crash at all.
  11. Hallahub

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Here are some additional photos.
  12. Hallahub

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    You are comparing a nac with a different theme than peugeot and a peugeot cirocco. Why you are that surprised of non-matching colors? When both nac and cirocco use peugeot theme the colors matches, blue with blue bronze with bronze etc..
  13. Hallahub

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Hi, which is your value for that zone?