Contenu récent par Jacek

If I understand correctly I need to build a new Arduino/CAN Shield set to upload Peugeot 208 calibration. I have updated CAN2004-CAN2010 Arduino steeringWheelCommands_Type to 5 ( C4 I / C5 X7 MENU mapping + SRC on wiper command button + TRIP on ESC button). I am struggling to find setting for...

Hello, I have Citroen C5 X7 and added NAC from Peugeot 508. I have made CAN2004<>CAN2010 interface according to instructions in this forum. I have used Diagbox to set a proper settings and VIN in NAC unit. I have loaded program to Arduino and set the configuration to C5 X7. The problem is that...

Hi, I was adding Night Vision to BMW X5 F15 and as I see it is more or less the same hardware (from FLIR). I've had to find a camera and module from one donor car, it is very important as both are coded together to original VIN. Then I had to buy VIN conversion module (customretrofit.ro) to make...

Hi Vlud, I have DEVHRPT from C5/DS3 and DGT2 from DS4. Hmmm, ok, so here is my problem. Thank you!

I think I know the reason for issues with screen. There is a difference how SMEG+iv2 and NAC are connecting to the screen. Both in terms of CAN and power supply. I will be testing that soon and post the feedback.

Hi Almeria63, Thank you for response! I am fully aware of the need to build CAN2004 to CAN2010 interface. I had originally NG4 in my C5 and went a long path of buying first CAN2010, finding out it will not work and then buying a proper CAN2004 SMEG+iv2 :) I have done today automatic telecoding...

Hi, sorry for writing in English on French forum, I hope it is fine :) I have BSI2004 car (Citroen C5 X7) and try to install NAC from P508. Previosiy I had SMEG+iv2. I have bought Chinese plug adapter, but when I try to lauch NAC in my car through this adapter there is only black screen. I know...