Contenu récent par king_george

!508 FMUX

I used a 3D printed holder that I made myself. I didn't calibrate it, I didn't have time to do it and have since sold my car. I was planning on doing calculations to determine the values in order to calibrate it properly with arduino based on how original visiopark 1 is done on other cars. Other...

Gen1

Le plus facile : revenir à 0 avec une config de 208 dispo dans le tuto et repartir sur une base saine en modifiant uniquement les paramètres nécessaires

Pinout disponible dans le tutoriel pour passer au NAC à partir d'un SMEG+

Pour savoir si Wave4 est un SD, il faut qu'il soit dans cette liste. Accessoirement tu peux regarder la NON mention "HD" sur l'étiquette Manque de GPS dans le VTH : il faut activer l'af la navigation sans le nom des rues Avantage Wave4 vs Wave2 : Plus fluide

If there was a way to not pay for the Token widely known it would've already been heavily exploited for many commercial and non-commercial uses and therefore patched by Stellantis server-side So, even if there is a way, no one would share that information publicly.

No, the high beam camera can only do the high beams. For speed sign recognition you need a CVM.

Hi! Could you share more about this? Where can we check your program to use this data in order to code these ECUs? Thank you!

The control unit in the passenger door is to memorize the mirror position for the passenger door. The other control unit to memorise the position of the driver mirror is the driver window scitch unit itself. Mirror with memory usually come with memory seats (except some cases like your C4...

Toutes les infos sont sur son tuto dédié 208/2008

https://github.com/ludwig-v

Connect arduino to a canbus shield or mc2515, send that program in the arduino, connect the canbus shield or mcp2515 to the can confort network and it will "turn" NAC SLI frames into CVM SLI frames

Thanks! With this I'm guessing it should also display speed info on VTH?

Yes. Could you show us your 2100 zone of the matrix?