Contenu récent par lizi0

I have the same issue. On the arduino-low speed bench scatche and connected: Nac: 11 - 12v 22 - GND 10 - canH 21 - canL Setup is not starting. If im using BSI and system (nac + display) is starting. gND from power puply is not working any idea what is wrong?

@VLud thx for grate job, almost all is working. Just only "logo/picture" of the car. I have P3008 gen1 and if i setup parameter 2108 on 0x1A w4 3008 i have picture of new 3008, if is possible to put picture of old/gen 1, 3008?

@VLud, could you refresh photos/screens on the first page? I want to change RT6 at the old 3008 to NAC and i need to build CAN2004 <->2010 converter. Thanks for help.

cameras numbers 180 are 130deg and in the panoramic view they will show mirror screen. If you want to have normal view you need to use setting like reversing camera or change camera for number in the end 080 (that is 180deg camera) and use with panoramic view.

tap (twice) tree fingers in the same time on the screen

By Diagbox you cannot change configuration of the car. If you want to telocode you car ping me, i`m also from Krk

That is also my assumption. PSA is blocking not servives on them servers but on the NAC (i suppose that due the massage on my screen before services stop working).

Both NAC which was replacements was Wave3 with sw 44 Vlad i knew that you are the master of the CAL and CONF files. Mayby that is case of the specific settings/calibration/configuration of the units?

I do not knew what i`m doing wrong with the NAC units but....I have issue with the two units of NAC. I have C3 MK3 where was NAC wave2. Some time ago replaced is form Wave4 from Jumpy where services was already activated till 2023. After instalation, calibration and configuration of the Unit...

Hi Team, Just one question: where is or which zona is responsible for the contrast/brightnes/colors of the rear camera? I need to modyfi config file base on the C5 Aircross (settings of camera colors) to the C3.

@VLud, I am impressed with your knowledge and commitment. You are making very good job. Im happy user of C3 mk3 with new ECU map: P At last two weeks and changed wave2 to wave4. At the wave4 Tomtom trafic was not activated. at this moment i activated it by i do not have those functionality...

After few hours at the car i found solution but i need your help to implement it. Two calibration files are involved: one is C3_III-9692460380 and secound one C5_AIRCROSS-9694254780. Under C3 calibration file colors of the camera are "mismatch", under C5 calibration file colors are ok but touch...

Today I wanted to calibrate the nac based on the wave4 C3 AirCrosse Custom file. Unfortunately, when uploading the file, the program hangs at 86%. After rebooting, the radio has a black screen and no functions are responding. To revive the radio I uploaded the C3 calibration file again. The...

thx VLud, best regards for you and marcins

Hi Gentelmen, I need your help with the wave4 configuration. Few days ago i was change Wave2 on Wave4 at the Citroen C3 mk3. I done calibration base on the 308 config file and configuration base on the oryginal wave2 settings. In the same time i modyfied Parktronic Vision for 180deg panoramic...