Contenu récent par Manuel Pérez

To modify the calibration and configuration you have to use this program, using another arduino and can shield. With this program you can modify among other things the type of steering wheel to 13 that you need In addition to other possible improvements to your needs, without paying PSA...

Hello, you need to use Peugeot 208 calibration, in the sketch of can 2004-2010 mark the C5 steering wheel option there are several options in it, the last one is the one I like the most.And with the Psa diag application, one of the tabs is steering wheel type, you must choose type 13.

What improvements or inconveniences can using listen can 2004 bring, when we use Nac and Cirocco for example in C5 x7? what should be the choice for my case?

Hello, I have a Citroen C5 with can 2004 to can 2010 installation Nac working, now I have installed a Cirocco and it works with only can high 2010. When I connect can low, nac is silenced and faults begin. I have measured with an Oscilloscope and no can low signal appears 2010.Is this normal?I...

I have lost confidence and I don't know what to think. I use many forums and I have never been involved in anything like it.By the way, I had a thread about Installing Nac in C5 and it was deleted and never came back. Neither have I been given any explanations from those responsible for the...

Hello, I am Manuel Pérez and I feel affected by all this that is happening, that they tried to involve me and I have nothing to do with it. I can only thank Vlud for his work, I want to contact you to pass you the file for the Spanish adaptation of the program. Greetings to all. Manuel Pérez.

QUOTE="Andrew_PL, post: 2672132, member: 135435"]I have a problem with the battery. The voltage drops too quickly if the car is stationary for, say, a week. The situation arose after installing NAC. Will changing the sketch to a new one improve the situation with the BSI and NAC dream? If...

Si ese problema es conocido, en un croquis anterior y posteriormente fue modificado, y If this problem is known, in a previous sketch and it was later modified and corrected, the BSI did not turn off, there were some cases of colleagues who were without battery the next day. Update

What car do you have selected in the Car Models tab? At least in Nac the brand that appears at the beginning and images will be that of the car that you have selected as your model.

Hello @VLud, I have been dedicated these days to translating the vocabulary of the program to make it even more universal and can be understood in Spanish for those who have certain difficulties. Thank you very much.

I just changed wave2 for wave 4 sd, I have put custom Peugeot 208 configuration, and I have achieved improvements in the menu key, which changes between the main fields, although I had to modify the sketch because it did it in an uncontrolled way. I have also not found a similar saloon model to...

Excusez-moi @VLud, vous pouvez inclure une amélioration dans le croquis actuel, pour le volant type 3 Citroen C5 j'utilise des millis pour changer la police, car il est impossible de taper pendant le changement vu la vitesse, je l'applique à mes croquis en les modifiant, mais j'aimerais que tout...

@VLud, hello I have been doing tests and reading using the ultimate can comfort sketch where steering wheel 3 have been added for citroen X7 and I have found 2 problems, in case they can be solved the first one affects steering wheel 2 and 3 (in case it helps you to solve better ), and it is...

@VLud thanks, I confirm that now, the bsi does sleep, and the steering wheel keys work, but in my sketch I had included this part long time1 = 0; long time2 = 0; bool push = true; } else if (id == 162 && noFMUX) { tiempo1 = millis(); if (tiempo1 > tiempo2 + 200) { //Aquí...

Hello, I have the impression that it does not work properly, the sleeping state, before everything was turned off and the air conditioning flaps were heard closing and instead when I go to the car when starting after several hours, it is asleep, It is not the usual way of functioning. Do you...