Contenu récent par muroveizi

  1. M

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    To fix the echo problem, you need to update calibration, try one from hybrid, worked for me. To fix the camera: read a NAC address 021A, answer would be 0 or 1, you need to write there the opposite and then rewrite back the original. >764:664 1003 22012A -> returns value 00 or 01. (6E012AXX)...
  2. M

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Hi, can someone please dump their 2101 zone of ESP if advanced grip OR/AND hill descent control enabled. facelift 3008/5008 Thanks. @mark102
  3. M

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    The latest wave4 update was on 2023.. so no updates for him too..
  4. M

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    https://www.drive2.ru/l/640508130328848588/
  5. M

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Hi, Trying to unlock the ESP90 without any success. here is my reading: 222100 6221000AFFEF13FFFFFF03FC4102F8837C0000FCFFFF007EB934FEFF13E1FFFF59ECA3FFE0A01006FF01 222101 6221010AFFEFFFFFFFFFFFFFEFFFFFFFFFFFFFFFFFFFFBFFFFFFFFFFFFF7FFFFFFEFEFFFEFEFDA7EFF 222901 7F2231 22F080...