Contenu récent par onzar

Is it possible to code the refill / top-up capacity of FAP Fluid Additive? Via Arduino.

Hello everyone :coucou:, I'm planning to install an electric trunk lid on my 5008 II GT 2019. Does anyone have a wiring diagram for the 5008 / 3008 II electric trunk lid?

You need to do coding in BSI and NAC: 1, BSI: Via ARDUINO terminal >752:652 1003 :B4E0:03:03 2E234C01 1001 2, NAC: Via VLud program: NAC zone 2127 -> Vehicle Access / Parking -> Driver Welcome (look at the attached photo)

Hello everyone, Visiopark 2 installed and working. I fought for 13 hours but I did it. It turned out that the cables for the Visiopark 2 controller were running in the connector in the trunk, which had to be replaced in the connector itself. PINs of the rear camera for the blue connector in the...

Does anyone know the answer? My 5008 II GT 2019 does not have a front camera, only a rear camera. I want to install a front camera and now I have a question. To buy: - 9820438080 - front bumper harness for 6PDC + Camera + 2 halogen lights - 9809301080 - front camera - 1617977480 - rear camera...

Just like in the movie

Hello @zzzzzz, I don't know what I'll do next. I have a 5008 II 2019 and I turn on Park Assist from the touch screen. I don't know how to turn it on in DS7. You have to ask someone who has a DS7 and turned on Park Assist. In my AAS in zone 2101 was only A5 and I changed to BD in your AAS in...

Maybe I didn't explain exactly what it was about. These are the UNLOCK KEYS to ASS provided by VLud If you use the UNLOCK KEY not CODING in AAS_UDS_G6 from AAS_UDS_G5, the AAS will be blocked for encoding. (but this information needs to be checked. Maybe someone from the forum knows the answer?)

You're right. I guess it's like this: AAS_UDS_G5 - BOSCH (I think in cars 3008 II, 5008 II) AAS_UDS_G6 - VALEO (I think in car DS7) Be careful because I read how you will enter the wrong one: IF YOU ENTER IN ECU WRONG UNLOCK KEY, ECU WILL BLOCK!!! Once locked, no further encoding can be...

Hi, I activated Park Assist in my 5008 II GT-Line 2019 4 days ago. The activation condition is to have 12PDC = 6 PDC front + 6 PDC rear My old values before coding: 1. AAS_UDS_G5: >75D:65D 1003 222101 answer from arduino: 62 2101 A5 1001 (closes sessions) 2.BSI: >752:652 1003 222300 answer...

IF YOU ENTER WRONG KEY, ESP90 WILL BLOCK!!! Once locked, no further encoding can be performed. The ESP90 controller will function normally, but coding will no longer be possible. The same thing happens in AIRBAG if you enter the wrong KEY :pfff:

Hi, what key did you use to unlock the ESP90 - UNLOCK_KEY - :60A5: ?

Hello everyone. I finally managed to turn on Park Assist in my 5008 II 2019 and it works :bounce:. A week of reading the entire Arduino forum. It helped and I would like to thank everyone on the forum for their help and useful information. Many thanks to @VLud for providing the program to NAC /...

How to do it?

Hi all and @Albatros24, @marcins, @VLud I'm trying to turn Park Assist in my 5008 II I have a problem whit error code in AAS_UDS: B1003 54 Secure configuration fault (Fault in the secured telecoding of the parking aid ECU / Usterka zabezpieczonego telekodowania kalkulatora wspomgania...