Contenu récent par Pacote-san

AMAZING! I was just talking with a friend about the future when IVI boards get worldwide available but I was sure it would took way more than that for the first person to get his hands on one! World's first indeed :) Congrats!

It was printed 2 halves in PETG then glued after. It is press fitted, it fits very snug so you need a plastic tool if you want to get it out. Cirocco panel is screwed then you fit the casing Unfortunately I don't have any pictures of the back but it is just smooth plastic.

I choose not to because whenever you get a fault/error it will display on the screen everytime you turn the car (and if you are driving, it will display live) :) I purchased the 3d model from moffik (https://www.drive2.ru/l/603816602676234151/) then I printed here in Brazil and painted myself...

Thanks a lot @VLud for the Cirocco app. One more for the team C4L with 3008 cluster :D

Nice work! Reminded me of doing this with some old Motorola modem. At least those you had JTAG option when it was not fully bricked.

I was under the impression that we could switch from ECO/SPORT enabling this button. I was just curious because I have both ECO and Sport buttons and they work just fine (ECO shows as snow on the panel but works as ECO normally) Wanted to know if changing via cirocco button it would work the...

Using latest version of @VLud Cirocco software I was able to get 2101 reading and it showed that my cirocco was getting PUSH from dynamic (sport) from pin 17 I wired a pin to slot 17, turned the car and expected the Dynamic screen on the left when pressing (shorted to ground) but nothing...

From Miller @clubgaragecreativestreet https://www.instagram.com/clubgaragecreativestreet/ I think he is almost set with hardware config The only thing left would be designing the 3d casing but he is already doing that. The end result will be awesome (I myself find that the way it is with the...

I think is depends on the cirocco firmware. I heard some don't even come with red theme so even if you change RED on NAC, it won't change on cirocco. So probably those 3 are the only ones that are supported by the latest cirocco firmware. I just hope someday I'll be able to change the theme...

Thanks, will try it out

Just a quick question If I were to test it out what happen if I "PUSH" pin 15 on my cirocco Should I ground the pin or it needs to receive 12v to activate? Thansk!

@ xs21 just get a cheap MPC2515 and wire it up

Apparently it was my OBD2 cable that wasn't pushed far enough into the connector. Tried again and using 120ohms jumper on mcp2515 and working fine

Just saw your post saying "cirocco 2100 -Ambience to Rheostatage" :) Now I just need to make my Arduino work I programmed with the sketch (changed to 8MHZ) connected obd2 pin 3 to can High and pin 8 to can Low . Ludwig software connects to Arduino but when I click Cirocco nothing happens...