Contenu récent par rafikemd

  1. rafikemd

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Hi there. Any news? We're you able to achieve ACC?
  2. rafikemd

    levier de vitesse automatique

  3. rafikemd

    levier de vitesse automatique

    Yes. It is possible!
  4. rafikemd

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Yes. Does not work. Because mine is v46.6 and does not have those options available
  5. rafikemd

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Thanks for sharing. I'm my case I'm not going to achieve ACC. My engine ECU does not have those ACC options and my BSI EL4 does not have HS2 nor ADAS in the corresponding pins of 60v black connector.... Dead End
  6. rafikemd

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    It's a 1.2 pure tech petrol engine? Or 1.5 diesel? Both of them support ACC. And your BSI is EI4 or EI5 or FI5?
  7. rafikemd

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    I'm fighting the same problem with engine ECU EC5 v46.6
  8. rafikemd

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    I think you are right on that one. Have succeed? Thanks
  9. rafikemd

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    @JonnyMnemonic @rafał999 @domz I'm trying to activate ACC in engine/injection ECU = CMM CONTI V46.6 EC5FF P21M PL7 Can someone help?
  10. rafikemd

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    We are facing the same problem here with DAE... So you didn't find a solution? Thank you
  11. rafikemd

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    @maslantas Did you solve the 0014 error in DAE_UDS?
  12. rafikemd

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Lane positioning assist (LPA) + Adaptative Cruise Control (ACC). I want to enable them in my car if possible. @Barracuda @weirdcactus @onzar My car did not come with radar from factory. I had to install it from a donor car. My car is 2023 Peugeot 208 Engine = EC5, like the old 1.6 aspirated...
  13. rafikemd

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    https://github.com/ludwig-v/arduino-psa-diag You need to send the commands correctly: >74A:64A 1003 :E2E25:03:03
  14. rafikemd

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    @onzar can you please share your values after the activation? Thanks