Contenu récent par reebee

  1. R

    Android Auto - Autostart

    you can buy a AI box that emulate Car Play and will start automatically. I bought Apple pie 2.0 plus
  2. R

    [NAC Wave 4] MAJ firmware 44.07.33.32_NAC-r0

    update done! less then 30min, yellow zone disappeared, now light green, alert still there
  3. R

    [NAC Wave 4] Cartographie V15

    no unfortunately yellow still there
  4. R

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    I can see now the echo coaching menu, but it is not under Vehicle Apps but under the Hybrid menu page, and if I activate it the Eco Save tab disappear. This is different I think from Deisel cars, so no way to have it
  5. R

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    echo coachin 2133 found! all ok now thanks
  6. R

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    I did all, 6 ambience set, I can chose color as you said on NAC all colors are available on Cirocco only the bronze. Activated Onboard computer on NAC, I cannot find so far the Eco coaching, is on VLUD program? About Driver welcome I could telecode the 234C and now is set at 01 so the answer is...
  7. R

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Thanks, ok i will download latest VLUD program
  8. R

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Ihave same car but Hybrid, how did you activate trip computer on NAC, I was not able to do it, and eco coaching also not present, And also Yellow menu like PSE? Thanks
  9. R

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Yes it ask to put in N but in reality you should pur in D and accelerate brake and put in R when required. It happen to me as well, it is not full automatic, but semi automatic, try!
  10. R

    [NAC Wave 4] MAJ firmware 44.07.05.22_NAC-r0

    shame, but there must be a way to get rid of them. I saw some picture of new 508, it seems it use same HW same screen and the clima banner are gone when using android auto
  11. R

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    I have 508II Hybird SW 2022, so I wonder if I can also activate the full option ("Full Park Assist" WY42), even if I am happy with the version (Park Assist" option code WY45)
  12. R

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    From what I see here the car can do all by itself, but maybe only with that button on joystick that I do not have. Not possible to do with a touch on screen?
  13. R

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Thanks to these instructions, I was able to activate the Park Assist. However, I experienced some issues with the timing of the instruction. I noticed that the park assistant is not fully automatic, as I still need to put the car in either D or R gear for the steering to turn automatically...
  14. R

    [NAC WAVE 2] Problème MAJ -> Firmware update error

    I had the same issue using an USB stick 8gb, then I downloaded and installed all on a SD card 16gb with USB adapter and the process went faster and smoother, all is ok now
  15. R

    [NAC WAVE 4] Firmware 44.06.44.22

    For example, the two banners on the side of the 10" screen that take up half of the space just to display the temperature. However, you cannot change the temperature because when you try to push on the banner, another menu appears and covers the map navigation and exit from Android Auto if on...