Contenu récent par Ringelberg

Hi, does anyone have the key to the AVAS (Pedestrian horn). Or can someone explain to me how to find it. I have a diagbox and arduino connected to it. Want to disable the noice. tnx.

good work here Vlud. waiting to use the open source diagbox to recode the complete care. i have a working arduino setup. is there a way to use the arduino to send a code to open and close the doors? or sniff out to find the codes to open and close the doors? I Like to build a proximity module. tnx,

Nice, you did it with an other VIN?

hi guy, this week i change my C4 for an e-2008 GTl line. it' s asome. And the best part, it already has the NAC and dash :P But when i picked up the car it did not have adaptive cruise control. Is has normal cruise and emergency brake assist. Dealer says it cannot be changed. does anyone...

Update: i tried the configs but no luck.

i tried Tiph his settings. but no luck. (Even the complete config) it just gets darker then 5.:D so the problem is somewhere else. will try the settings of his NAC and Cirocco in 1 setup. otherwise it's in settings that are not accessible at the moment. im already happy that my display is not...

@VLud Can you tell me the setting to look for? my file looks like 0200=A0307FC00F01DC644480DC00F06D14320000020305070A0E1319222E3D526D91C0FF04800A141E28141E2832600005121F2C3946535F64A05600011388186A508CFE13 2100=76C09808000000000000000C6200001A08018B0780 2200=08000000010000 2300=00EC3054BBC0...

hi guys. still looking in to the issue of my CIROCCO display that does not want to dimm at night. is there anyone that wants to share his config and calibration file of a C4 II from one that does work?

okay, did not know that. alway had the idea that it was in the Calibration file. then we need to wait. @VLud if I can help test things. im here to help. :)

My settings are: but a personal note: I have issues with the display not dimming. when i turn on the lights

Can anybody help me with a 9692618180 calibration file for a Cirocco C4GP. Updated my screen with the 9693163580 update file using Diag box. but it has an isue. tnx

hi @VLud, trying to make my BTA work. I have a NAC, BTA and service from the same car. order a green cable and want to build the interface needed to power the device. if seen the pinout from the BTA. but can you explain where you connect it to. 12v and ground I can find. But where dit you get...