Contenu récent par semitop7

  1. S

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Yes, you are right. But I think that there will be more or less enough space that approximately meets the requirements for parking lines. The main thing is that the camera should sees the lines. Then you need to follow the instructions on the diagbox. The whole procedure takes about 5-15 minutes.
  2. S

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Yes and no :) First I set the parameters in 212A which are valid for my car and then I did a "repair", I don't remember what it named in Diagbox. As I understood it something like changing 01 to 00 to clear the cache, which didn't work with arduino for me. It looks like in this image.
  3. S

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Issue SOLVED! I used Lexia 3 + Diagbox. After repairing Visiopark everything looks and works fine now. I don't know why the 212A zone manipulation didn't work for me. So if anyone has the same problem, you can try to solve it using Diagbox. Problème RÉSOLU ! J'ai utilisé Lexia 3 + Diagbox...
  4. S

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    English: At the moment I have 5 themes activated. Standard ones: RED, BLUE, QUARZ and two new ones COOPER, ELECTRO. Why did I choose these two additional ones? - because they are displayed not only on multimedia, but also on 3D icocpit. It looks harmonious and cool. French: J'ai actuellement...
  5. S

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    English: Firmware version: 44.07.33.32_NAC-r0 (latest). I tried almost all the ways except diagbox, but the result is always the same - nothing changed. During some experiments I found that some parameters still work. I can change the width of the parking lines, but all other parameters do not...
  6. S

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    I did as you described but nothing changed. Any ideas what I do wrong? Some details about my configuration: 7' SD, NAC VAWE4 HW: D4 W4_B4DAB_HW19 J'ai suivi votre description, mais rien n'a changé. Avez-vous une idée de ce que j'ai fait de mal? Quelques détails sur ma configuration : 7' SD...
  7. S

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Did you solve this issue? I have same with my car.
  8. S

    Consommation HDI 130 EAT8

    Ma consommation moyenne en ville est de 6l/100km. Kyiv, Ukraine. J'ai supprimé les trajets sur l'autoroute, il n'y a que la ville.
  9. S

    Camera 360 2008 de 2021

    Il existe une solution alternative avec aliexpress. Je compte m'en mettre un à la fin de la garantie de la voiture. K7 Ownice 6G https://www.aliexpress.com/item/1005003440278048.html?spm=a2g0o.store_pc_allProduct.8148356.4.668ee0305ysrxx
  10. S

    Pose d’un repose pied gauche sur SUV 2008 GT 155 CH

    Je me suis acheté le même sur un autre site. Prix € 5,61 https://www.aliexpress.com/item/4000673668258.html option est également possible https://www.aliexpress.com/item/4001162635938.html
  11. S

    Voyant non détaillé dans le manuel

    à partir des instructions pdf - "Un appui long sur le plafond conduit à son arrêt complet (dans ce cas, l'icône OFF est affichée)."
  12. S

    Cette petite lumière qui manque, vos avis ?

    https://www.banggood.com/custlink/mGKRF0gKmU
  13. S

    Peinture blanc nacré

    J'ai le même problème. Regardé d'autres nouvelles voitures, également une teinte différente sur le plastique et le métal.