Contenu récent par tech73

  1. T

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Well you can believe what you like I have all the proof here I have nothing to hide he certainly has i certainly would not have made all of that public with out good reason we have found a lot more and there are other user names he is using on here.
  2. T

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    He was a crafty sod as he knew all I was doing with my car and very clever with it he knew more than I did about can bus and Arduino we noticed downloads of car images from a car sales website both Peugeot and Citroën and downloads of wiring diagrams for cars he had never worked on I'm pretty...
  3. T

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    @davidcentrale Right it's about time you all know the truth around all of this fiasco for a start @Manuel Pérez is a friend of mine. All of this started around mid January an ex colleague I worked with last November I gave him the PSA diag program to use I told him about calibration so he...
  4. T

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    why the bloody hell am i being dragged into this you lot are mad or crazy who the f@@k is @Michael plyer ???
  5. T

    Arduino Sketch for 308/3008/508 Digital Cluster Retrofit

    Could you please help me with my cirocco Thank you
  6. T

    Arduino Sketch for 308/3008/508 Digital Cluster Retrofit

    I think my account has been hacked I have now changed password and enable two step verification to protect my account So I have no idea what has happened since Friday I enjoy this forum it's very helpful Thank you
  7. T

    Arduino Sketch for 308/3008/508 Digital Cluster Retrofit

    I have fitted a C5 aircross cirocco in my 2012 c5x7 I need to get the parking sensors esp buttons working this needs to be done with Arduino
  8. T

    Arduino Sketch for 308/3008/508 Digital Cluster Retrofit

    hello @Keryan i wonder if you can help i have no knowledge of arduino code i have a citroen c5x7 2012 can 2004 i have installed nac using vlud sketch and arduino and two can shields all working i have now connected a cirroco from a c5 aircross which is working on the same bus as the nac all...
  9. T

    [TUTO] Adaptateur pour SMEG/NAC/Matrice CAN2010 sur BSI CAN2004

    @VLud trying to find a calibration but the thread is no longer available any ideas ? Thank you
  10. T

    [TUTO] Adaptateur pour SMEG/NAC/Matrice CAN2010 sur BSI CAN2004

    could someone please help me with this installation as the creators of this do not want to help they just ignore you ! Now the PSA diag thread has gone ?? What is going on here
  11. T

    [TUTO] Adaptateur pour SMEG/NAC/Matrice CAN2010 sur BSI CAN2004

    @VLud i have tried to edit this post but the edit button is absent i wish to ask for your help i have nearly finished my install nac and cirroco in c5x7 see attached image i still have the same questions my other nac in 2008 c4 picasso when fuel is low auto wipers switched on off engine fault...
  12. T

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    @VLud could you please help me I posted on the Arduino matrice page awaiting some help please Understand I have learning disabilities but if you could help I would be eternally grateful Well done for all your work so far Just to say I am not here to make money I just want modify my car I'm...