Contenu récent par Vorvolk

Hello! So, i have 2017 Peugeot 3008 here with RCC unit. Is it possible to switch to NAC for navigation with this tool? If yes is it possible to get map update service with it? Do i need new unit or second hand is ok?

52 41 Central 51 40 Sub keep in mind that those are not amplified by head unit, you can't hook speaker directly to those pins. i'm not even sure that there are any PSA car that uses those pins atm, they seems to be added here as some future-proofing, as "focal" setup does not use those at all -...

I do not have NAC's schematics but i do have RCC ones. AUX is ADC (, then it goes through software mixer then resulting mix goes through i2s to FDA450LV - which is DAC and amp solution. Since AUX sound is mixed there is no way it may bypass internal DAC. There is no simple solution to bypass...

Btw is there any way to enable music track name display on cirocco display from RCC unit? or it is only available on NAC system?

Wow thanks man, you are a savior!! Seen menu right after 2. Applied 4 and 5, now its only 3 themes. this needs to be attached somewhere near initial post. I mean, themes looks like the most harmless thing you can tweak(

1. I haven't touched calibration at the beginning. I only attempted to upload it once it was suggested here as means to fix my problem. Still was never able to upload it 2. Initially i used 1.0, now it is 1.4, so far nothing changed 3. log attached 4...

I do have access to parameters and can change any of those. But i can't upload calibration. When i try to upload calibration i always recieve 7F2783

All 3008 2017+ are with digital displays here. Default theme parameter did nothing from the start. Reverting to saved parameters was the first i've attempted, so no, there is nothing could be done from parameters. Settings are already reseted by guys with official tools so theme should be no...

I went through his method and it seems like it was the cause to deletition of calibration files in first place.

Head unit just refuses to accept calibration > 1001 < 500100C80014 > 1002 < 500200C80014 > 2701 < 7F2783 seems like those guys with official tools were right. headunit gone for good(

So i found some engineers with official tools and software and they also were not able to fix problem. Something about calibration files missing and that they have no means to write them back, only to replace headunit(

mine nr is 9692987580 there is no cal file with such nr here

I did. Unfortunately still not working. Reuploaded saved settings - also did nothing

hard reboot as in disconnect accumulator? because reboot from arduino changes logo but still leads to the same "Ambiance not configured" screen and piano keys do nothing (press-hold to reset not working too) UPD: Changing brand and car model not helping. Seems like there is no "Theme 4" on any...

Seems like i bricked my head unit by changing themes settings. Under 2127: Telecoding_Fct_HMI i had enabled all eveilible themes, an then attempted to select one of those themes in configuration menu of head unit. For first 3 it was ok (blue, copper and red) but 4th was blank, it selected ok...