Contenu récent par weirdcactus

  1. W

    Arduino Sketch for 308/3008/508 Digital Cluster Retrofit

    Amazing work! Just curious, can other newer models fit a 3D holographic cluster? Say a 508 with a 3d cluster from a 308. So sad we didn't get this option of higher models
  2. W

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    I would say that your BSI probably has these functions. You can either check by reading the settings (there should be a list of settings for BSI) or via DiagBox (its free to check active functions, no need to buy a token). For LPA, i think someone already posted the codes a long time ago. The...
  3. W

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    There is none. I had nothing around the interior rear view mirror before i installed the CVM. There was no wires in that area either. Until now i thought this was the light & rain sensor (dont even know what it is anymore):
  4. W

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Hi! Since i installed and activated the CMV2 camera i gen "Communication Error with Rain/Light sensor" in BSI. My car has auto wipers and lights, but there was no sensor in the windshield (or at least i assume so, the car had a crash in the past). Now the wipers go intermittently on auto, even...
  5. W

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    I have the same configuration. Peugeot 3008 2020 GT PHEV BSI - 2300 = 73 AAS - Semi automatic parking active DAE - Semi automatic parking active (checked with Diagnostique tool) NAC - same via parking menu I press the Parking option on the screen, then pick Lateral parking, a green steering...
  6. W

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    I have the same issue. I believe it was already discussed here, but i didnt follow the topic properly, also didnt have time to finish the coding. Maybe try going once again through comments. I remember vaguely that @Albatros24 was the first to have this issue? (sorry if im wrong and I am tagging...
  7. W

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    BSI @ 2300 is 73? 73 (City Park AMSP et Aide Visuelle au Recul et avec fonction AAS Arriere et Avant) Soo, automatic parking (with driver intervention) + camera + sensors (front & back) i assume?
  8. W

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    you have to write it very fast, the session lasts like a couple of seconds. Keep the secured traceability in your clipboard btw
  9. W

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    but again, things might be different depending on the car and some bytes should stay the same, right? Its not really copy paste 😅 or is it?
  10. W

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    ESP? Havent seen any coding for it in the thread. maybe this is missing. What should be changed here?Currently i dont have the car with me, but i will try to come back with the current values asap
  11. W

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Hello! I tried this on my 2020 Peugeot 3008 I am a bit confused by the code for AAS_UDS. So I had A7 before and changed to BD, but now i get an error to the parking sensors. Also for DAE i have 61 A0 05C0C90002000001 - again, it's just a bit different but i do not understand the zones. Can you...
  12. W

    [TUTO] Remplacer la caméra de recul 130° par la caméra panoramique 180° (Visiopark 1) sur 308

    Hello! I know it's been debated a lot a long time ago, but do mirrors actually go down if you have memory seats? I just had a test drive with a 308 and a 3008 without memory seats and they had this option. Are you sure this is not just BSI and no extra modules? Thanks!
  13. W

    [TUTO] Remplacer la caméra de recul 130° par la caméra panoramique 180° (Visiopark 1) sur 308

    Select your car -> repair -> radio unit -> repair -> repair kit -> you should find some menu for camera callibration Park your car in front of a parking space (not sure but i think 30cm in front of the lines), make sure to align it on the center and start the process. Then slowly move till the...
  14. W

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    If you want rear camera only, no need to connect extra module. Connect the camera directly to the pin 16&17 and take the power for it from the parking sensors module if u have one (both are sourced from the same plug & pins from BSI, no need to bring an extra cable in the front for that).