[TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

Hi everyone!
Can I activate online service like a traffic info and weathe on navigaion map?
NAC wave2 installed on peugeot 508 gen1.
NAC from peugeot 308, online service activated for this device.
But when I look at setting in my car service not activated ((
 


Hi everyone!
Can I activate online service like a traffic info and weathe on navigaion map?
NAC wave2 installed on peugeot 508 gen1.
NAC from peugeot 308, online service activated for this device.
But when I look at setting in my car service not activated ((
you need share internet connection from phone via BT to get the service active , you need active service (this is active 3y from activation)
 

[QUOTE = "joan carlos, post: 2591918, member: 128472"] Vlud
é normal que a tela apareça assim? eu comprei um nac wave2 euro com duas saídas lvds ao conectar antes que o telecoding apareça assim .. isso é normal? or está quebrado? [/ QUOTE]
As cores aparecem assim só na navegação or em todas as opções? Se for em tudo, ou é defeito do cabo lvds ou écran com defeito
 

não é o cabo pois antes de colocar o nac com duas saídas lvds eu tinha um nac com uma saída lvds e funcionou bem. esse nac com duas saídas lvds é um Peugeot 3008. não será porque o tamanho da tela é maior? ainda não foi codificado no DS5.
Check option where video resolution 2 checkboxes appear I have the same colours if wrong options enabled for the screen and resolution
 


Vlud
é normal que a tela apareça assim? eu comprei um nac wave2 euro com duas saídas lvds ao conectar antes que o telecoding apareça assim .. isso é normal? ou está quebrado?

You are on a French forum, we tolerate English but if everybody is talking in his mother tongue it is painful for everybody.

Yes it is normal, 3008s have a 8" screen, it is just a resolution setting issue here.
 
  • J'aime
Reactions: jordan87 and zoc

[QUOTE = "bagou91, post: 2591941, member: 112928"] our software detect the regional language of OS Windows, so if your OS is in English language, then software will be in english [/ QUOTE]

Hi @ bagou91my os in english lang 1.1.5.0 works and detect everything in eng on software, 1.1.6.0 French, maybe becouse russian translation is added to code?
 


Indeed it was a bit tricky to make it working, but all went good. NAC came from recent Citroen C4 Cactus
Your tool shows calibration 9693726480. However on your GitHub calibration for DS4 has different numbers DS4-9692638380.cal

Theme is the same I believe the name is Champagne - I have 4 of them available. If I enable 4 more themes (via your tool) they don't have names and do not apply

At first I wanted to just change bluetooth name as it contained extra characters like "BT_DS " (with 6-7 extra spaces) to just "DS4"
We also disabled A/C menu as it just shows the temperature but unable to change the values, I anyway have them available on DS4 dashboard below screen. Now NAC shows radio station on the top menu or currently playing song via BT

I believe main issue might come from "video resolution 1" and "video resolution 2" options. (I had them both disabled before) If I enable first option colours become corrupted, however the second option doesn't change anything

I want to also point that backup restoration doesn't help. All of the values being restored however menu is still broken :(

Hello @VLud
I believe it could be somehow not the exact resolution set as it seems that screen blinks when NAC is booting the monitor in my DS4 is DGT7C
Any possibility to debug my issue?

That how it looked before
upload_2020-11-27_12-3-6.png

I am also attaching my backup configuration
 

Pièces jointes

  • DS4_Wave3.nac.zip
    865 octets · Affichages: 10



@levanid : Are you sure you didn't attempt any modification before making your backup ? I have doubts because your Bluetooth name is "BT_DS" inside the backup, if your NAC was coming from a C4 Cactus it should have been "BT_CITROEN", who made the previous modifications to make it BT_DS ... ? I don't think you are saying everything
 
  • J'aime
Reactions: levanid

Bonjour @Misticrep
A mon avis c'est plus un réglage physique de la caméra à effectuer... tout du moins pour la partie droite-gauche.
Pour ma part, je vois également un bout du pare-choc avec ma 508 équipé d'origine.

Bonjour,
bon apres avoir essayé de manipuler la camera, je pence qu’elle est fixe, je n’arrive pas a ajuster, j’en conclu que je devais avoir cette vision avec mon smeg et que j’avais pas fait attention.

Je voulais aussi vous partagez la facon dont j’ai connecté l’arduino au vehicule, ca m’a l’air plus pratique que d’inserer les 2 fils dans la prise obd du vehicule, avec un renfort au chatertone au niveau des 2 fils pour éviter les mauvaises surprises :)

upload_2020-11-27_10-44-18.jpeg

VLud et bagou91, je me suis permis de faire partager ma modif sur le forum citroen en vous citant au passage. :bien:
 
Dernière édition:

Designed simple case fro Arduino uno v3 and Can Shield v2 , pins from db9 cutted and isolated with tapehttps://www.thingiverse.com/thing:4666958
case1.png

case2.png
case3.png
 
Dernière édition:



@levanid : Are you sure you didn't attempt any modification before making your backup ? I have doubts because your Bluetooth name is "BT_DS" inside the backup, if your NAC was coming from a C4 Cactus it should have been "BT_CITROEN", who made the previous modifications to make it BT_DS ... ? I don't think you are saying everything

As I mentioned on previous page the NAC Wave 3 came from Cactus and has been prepared (to make it compatible with DS4 dashboard and everything was working fine, all buttons on the steering were working good), that was not easy, but was implemented.
Unfortunately I'm currently unable to contact the person who implemented all this to my DS4

In my previous post I've attached how that screen been looking before applying modification with the tool – all menus were on the same place - that photo was made on Sunday in the morning. I did all the changes on Sunday evening

ds2.jpeg

I wanted to change "BT_DS " with (XX more spaces in name it was clearly custom misconfiguration made for my car) to another name, also looked for huge amount of available options to customise changed some settings via your app (for example it had 2 microphones enabled instead of 1 in DS4 and A/C menu was enabled but not possible to change settings, now it's off) and after applying changes and headunit restart everything is working fine except top and botton toolbars moved from screen edges and are not attached to screen edges. Car play is working great in fullscreen mode as before.

I am not blaming you in any case I am glad that now we have such a great tool I am just looking for assistance
Is there any way I could debug what is going on or see log of booting?
My assumption is NAC has some other extra options which your app currently do not support and these options might be overwritten and become defaults thus making glitches.

I am not fluent in French so please tolerate my English questions
Thank you :)
 

Pièces jointes

  • ds.jpeg
    ds.jpeg
    43.1 Ko · Affichages: 40
Dernière édition:


Sorry fo rwriting in english this time. I'm ti
RCC A2 c'est bon ;)

Sorry for writing in English this time. I'm tired and it's easier than French :d
So, I got myself a cheap RCC A2 from a Citroen C3 to put on my 308 instead of the RCC/CN.
Radio-Nawigacja-9820250280-Citroen-C3-Producent-czesci-Citroen-OE.jpg
IMG_20201127_191656840_HDR.jpg
IMG_20201127_160952512.jpg

Now the fun part begins: calibration is not successful, no matter what RCC file I choose from the first page.
With 1.17 it doesn't start.
With 1.15 starts then hangs at the finish without restarting the unit.
IMG_20201127_161937385_HDR.jpg
With 1.16 I get the error code in the picture, at the end, also without restarting.
IMG_20201127_174021691.jpg

I even tried with two laptops.

I can set parameters but not the calibration.

Any ideas?
Thanks!
 
Dernière édition:

Yay!
I've just used your version 1.1.7 to check if I made some misconfiguration
I've turned off LVDS #2 on my Wave 3 and changed default ambiance theme to 2 (instead of 0)
[UPD] this parameter seems to be affected by 2108 alerts history

And now everything looks great
I am not sure if you fixed anything related to calibration or is it my misconfiguration, but now it works for me as it should

Thank you for such an awesome tool
If you need I could help you with configuration or tooltips to better understand each function

ds_1.jpg
ds_2.jpg IMG_9993.jpg
 
Dernière édition:

@wld : Please make sure you use the latest sketch, 1.1.5 / 1.1.6. / 1.1.7 will not change anything, nothing has been changed for calibrations between those versions

@levanid : Nothing has changed since 1.1.4 for calibrations so it was a misconfiguration, what do you mean by "[UPD] this parameter seems to be affected by 2108 alerts history" ?
 
  • J'aime
Reactions: levanid

Hi,

I´m having trouble with phone calls via Bluetooth. When placing/receiving a call people complaints that listen to themselves (echo).

My system:
2019 Peugeot 3008 1.5
System version: NAC firmware version, 21.08.84.12

Mobile: Xiaomi Mi 9T Pro, Android 10

I have found that if i lower the Nac volume to level 7 people the echo stops, but inside the car i can hardly listen.

Is calibration update solve my problem
 

@wld : Please make sure you use the latest sketch, 1.1.5 / 1.1.6. / 1.1.7 will not change anything, nothing has been changed for calibrations between those versions
I compiled the sketch today on another laptop. Calibration of the RCC/CN works.
Currently trying to find a firmware update for the RCC...
 

Hi,

I´m having trouble with phone calls via Bluetooth. When placing/receiving a call people complaints that listen to themselves (echo).

My system:
2019 Peugeot 3008 1.5
System version: NAC firmware version, 21.08.84.12

Mobile: Xiaomi Mi 9T Pro, Android 10

I have found that if i lower the Nac volume to level 7 people the echo stops, but inside the car i can hardly listen.

Is calibration update solve my problem

Calibrations are containing microphone & sound calibration so yes it can
 

Calibrations are containing microphone & sound calibration so yes it can
Thank you for answer. I was replaced my RCC with NAC. Everything is working except echo.
Are there any bad effect to My NAC after calibration.
I will use a VIN from Peugeot 3008 with NAC to download calibration. Is it possible?

I m planning to do it by using official Diagbox
 



@levanid : Nothing has changed since 1.1.4 for calibrations so it was a misconfiguration, what do you mean by "[UPD] this parameter seems to be affected by 2108 alerts history" ?

What I mean is my menu toolbar position "breaks" when Alerts History function in tab 2108 is absent, when I enable toolbars take their position as intended
However that alerts history function breaks car icon when parktronic activated So I could have toolbars broken and car icon available, or toolbars in right position and no car icon with parktronic :pt1cable:

IMG_0001.jpg

I believe it is directly associated to "manufacturer's brand" option, I have DS enabled and it seems that it is linked to vehicle model in that menu
ds1.jpg

I had 0x02 enabled by default and it had car icon with parktronic (when toolbars position is incorrect)
I tried to pick like 6 more values from menu but they are all the same no car
ds2.jpg

@VLud could it be that "Vehicle model" should receive more values than there are in the menu in particular for DS brand?
 
Dernière édition: