[TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

Oui c'est ça, la calibration DS5 sur le topic est pour un Wave 2, tu sauvegardes ta configuration actuelle (du Wave1), tu met la bonne calibration (sur le Wave2), tu restaures ta config (sur le Wave2) et tu actives Android Auto et Carplay => Terminé :)
 


Que de chemin parcouru depuis les premiers Télécodage via DiagBox, très jolie boulot de dev... chapeau :)
 


Multilingue avec changement instantané (pas comme Diagbox), commencement des menus des ECUs, ça avance !
Quand j'aurais fini toute la base et les structures des JSON je pourrais publier et c'est là que tout le monde pourra rentrer en jeu pour la traduction, l'ajout des voitures, l'ajout des ECUs, etc ;)
Beaucoup de boulot où l'union fait la force et où toute personne qui aidera gagnera sa place en crédit :chinois:

If Brazilian Portuguese is on the way, I’m in!
Also, if you need to collect data from C4L LATAM, let me know.

congratulaions, great job!

Merci
 

It is possible remaining time from nac to be displayed on cirocco. I have cirocco from 508 and nac wave 2

I’ve been trying different parameters and I can afirm that it’s possible but I still couldn’t find the definitive config.
The compass and remaining time don’t work properly but I believe I’m close to the solution. I’m out of home but when I return, I will share some screenshots.
 
  • J'aime
Reactions: Dravos

Hi everyone,
@Ringelberg I finally managed to find the right configuration of the CIROCCO framework for automatic luminosity management. Starting from my configuration, I set the value to the line:

0200 = A030 5

At the start of the lights, the instrument panel reduced its luminosity and, in the same way, NAC has also aligned itself with the same intensity. As soon as I can share the configuration file.

@VLud I have used the latest versions of the NAC,CIROCCO tool and ARDUINO sketch, the tool often locks in the re-configuration phase and is not progressing. I have to do Cancel and then relaunch the operation. I don't get any kind of video error.
 

Pièces jointes

  • C4P_retro_130_new_brightness_5.cirocco.txt
    325 octets · Affichages: 28
Dernière édition:


Hi all guys, after making a wawe2 of an Opel Grandland I recovered an instrument and the radio from a 3008 so why not use the double lvd one ?? and here we are !! only problem the steering wheel controls and the EsP / ParkSistem controls ... do you have a solution for the controls or do I need to change the steering wheel?
P.S.
the frame of the painting is being worked on
WhatsApp Image 2021-02-04 at 08.51.40.jpeg
 
  • J'aime
Reactions: taskom

Hi all guys, after making a wawe2 of an Opel Grandland I recovered an instrument and the radio from a 3008 so why not use the double lvd one ?? and here we are !! only problem the steering wheel controls and the EsP / ParkSistem controls ... do you have a solution for the controls or do I need to change the steering wheel?
P.S.
the frame of the painting is being worked on
Voir la pièce jointe 19082

Nice work can you tell more info and how to connect the sppedometer cable ?
I must try it on my 208 !!
Thanks!!
 


Here I am,
I attach to the post 2 files describing the combine 208 and Corsa f. (same for all cirocco 3008 etc. etc.)
I created an adapter to leave the wiring of my vehicle totally original, bought on amazon, an lvds cable later adapted to my instrument.
For the dashboard I cut the lower part to get an original or almost original effect but you can very well use fiberglass and adapt the fixing on the edge of the external mask of the panel.
for configurations nothing new ....
Monday comes the steering wheel of a 5008 hoping that my Com 2010 understands "which language the commands speak"


WhatsApp Image 2021-01-29 at 23.08.58.jpeg
 

Pièces jointes

  • 208-D4EA04Z0P0-4-15_08_2017-Descrizione-funzionamento-_-Quadro-strumenti.pdf
    280.7 Ko · Affichages: 33
  • CORSA (P2JO) - Descrizione - funzionamento _ Quadro strumenti digitale.pdf
    335.9 Ko · Affichages: 35
  • J'aime
Reactions: taskom

Here I am,
I attach to the post 2 files describing the combine 208 and Corsa f. (same for all cirocco 3008 etc. etc.)
I created an adapter to leave the wiring of my vehicle totally original, bought on amazon, an lvds cable later adapted to my instrument.
For the dashboard I cut the lower part to get an original or almost original effect but you can very well use fiberglass and adapt the fixing on the edge of the external mask of the panel.
for configurations nothing new ....
Monday comes the steering wheel of a 5008 hoping that my Com 2010 understands "which language the commands speak"


Voir la pièce jointe 19093
what's this black part with dash connector?
 

hello i have a problem in my cirocco. black screen NDX FLASHER VERSION 10.1B. does anyone know how to repair? I try to open the arduino-cirocco but it fails and closes the software automatically.
 

hello i have a problem in my cirocco. black screen NDX FLASHER VERSION 10.1B. does anyone know how to repair? I try to open the arduino-cirocco but it fails and closes the software automatically.
You need to reload the calibration, but I don't know if you can with arduino and cirocco tool
 







i formatted my pc for windows 7 ultimate x64 and i have the same problem. it had happened to me before and it was just loading the calibration again. now with both libraries is that the arduino-cirocco gives an error and closes automatically. this list:
> 00
< 7F0011

> >75F:65F
> 1003
< OK

< 7F1012

> 1002
< 5002

> 22F0FE
< 62F0FEFFFF000002FCFFFFFF00011100000000FDC7B7E301928014

> 22F080
< 62F080981051468000029825340980FFFFFFFF0001FFFFFFFF

> 22F18C
< 7F2231
 

Well, I have experimented a little bit on my own car and I must say, that I am really impressed! However, there is something that is annoying me since yesterday: the outside temperature (up left corner on the display) will not appear. When I use my parameters back up and go back to "normal", it will be shown. But as soon as I change something, for instance adding one or two themes (and only that!) the temperature will not appear.

I also wanted to ask something: I read about this ban due to "commercial use", what I understand and actually support this politic. My fear is, if I enable and disable and read parameters and do back ups and and and on my own car (I am just testing now and of course modifying and restoring my back up), do I have to expect this "commercial use ban" at some point? I did not really understand how that works ...
 
  • J'aime
Reactions: Manuel Pérez

bonjour a tous une personne peut il en voyer le fichier arduino avec les librairies dans le logiciel prés a l'utiliser en rar ou zip en pm.Windows 7
j'ai tu mal a comprendre les librairies.
merci a tous
 

I also wanted to ask something: I read about this ban due to "commercial use", what I understand and actually support this politic. My fear is, if I enable and disable and read parameters and do back ups and and and on my own car (I am just testing now and of course modifying and restoring my back up), do I have to expect this "commercial use ban" at some point? I did not really understand how that works ...

That's something we should not talk about , when you don't use it to make money you safe :) Just we need respect this :)
 
  • J'aime
Reactions: Alhambra82


Truly appreciate your help on github.Sorry for my spell error.
I think you already get my version firmware.
I found the nav app data file in AUTO\1010123\NAC_B2\OVIP\nav-app-data-resource.tar.gz
but can't find the main app in rootfs....
Any idea for this?
 

[QUOTE =

The black box and a right mirror control module of a grandland x.
emptied of its electronics and soldered the connector on a multi-hole plate.
Tomorrow comes the peugeot 3008 steering wheel and let's see if it works well.
"marcins, post: 2605978, member: 131772"] cos'è questa parte nera con il connettore del trattino? [/ QUOTE]
 
  • J'aime
Reactions: marcins

(Je republie ici car je n'avais pas le bon fil de discussion) Salut à tous, mise à jour:
J'ai fait le codage mais la caméra de recul ne fonctionne pas, avez-vous des solutions (je joins des photos)? J'ai presque tout activé avec Arduino à la page 2105 et désactivé les 2 premiers éléments du menu 2106. Ma caméra de recul doit être à 130 °. Merci d'avance et merci à @VLud et à tous ceux qui ont collaboré aux travaux. (J'utilise un traducteur)
20210207_150222-min.jpg
 

(Je republie ici car je n'avais pas le bon fil de discussion) Salut à tous, mise à jour:
J'ai fait le codage mais la caméra de recul ne fonctionne pas, avez-vous des solutions (je joins des photos)? J'ai presque tout activé avec Arduino à la page 2105 et désactivé les 2 premiers éléments du menu 2106. Ma caméra de recul doit être à 130 °. Merci d'avance et merci à @VLud et à tous ceux qui ont collaboré aux travaux. (J'utilise un traducteur)
Voir la pièce jointe 19153

smeg to nac? this is usually the Chinese cable making bad contact