[TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino



Please Help how can I use video motion on nac wave 2 on peugeot 508?
Video working fine, but when I move the car video stop. Please help.
 







The file is there but still i get this error.


[ATTACH = full] 20280 [/ ATTACH]
 

Pièces jointes

  • upload_2021-3-29_22-47-20.png
    upload_2021-3-29_22-47-20.png
    82.4 Ko · Affichages: 48




@ionutfdumitru if you had read the guide carefully, vlud at point 5 tells you how to do it
Passaggio 5: aggiunta delle librerie necessarie per il progetto nel tuo IDE

Téléchargez arduino-mcp2515.zip
Téléchargez ArduinoThread.zip - Librairie pour l'éxécution parallèle de tâches (Protothread)

Et ajoutez les .zip un par un via ce menu:
5E9TvQe.png
 




bonsoir à tous, j'ai besoin de commandes pour réinitialiser la vague 3 de manière d'usine, quelqu'un sait si vous pouvez le faire
upload_2021-3-29_22-56-32.png
 

Pièces jointes

  • upload_2021-3-29_22-55-50.png
    upload_2021-3-29_22-55-50.png
    312 octets · Affichages: 20

Bonjour à tous, en attendant, je remercie le créateur. beau projet. J'ai tout fait correctement sur ma DS4. c'est beau et tout fonctionne bien. ma question: est-il possible d'afficher d'une manière ou d'une autre la température de l'eau et de l'huile sur l'écran NAC? :)

https://ibb.co/Smq2YYs
 

Bonjour à tous, en attendant, je remercie le créateur. beau projet. J'ai tout fait correctement sur ma DS4. c'est beau et tout fonctionne bien. ma question: est-il possible d'afficher d'une manière ou d'une autre la température de l'eau et de l'huile sur l'écran NAC? :)

https://ibb.co/Smq2YYs
Ciao @Nino19 , purtroppo non è possibile, per fare ciò devi cambiare quadro strumenti o montare rt6

Hi @Nino19 , unfortunately it is not possible, to do this you have to change the instrument panel or mount rt6
 
  • J'aime
Reactions: Nino19


Hi everyone, first of all i appriciate your work so very well. I have a 2008(05/2020) 1.2 gtline dyn eat 8. Me and my friends wondering if any way activate acc and otonomus drive assist? Our car has a cruise control but not acc also lane asisst but not lane keeping asistant. How can we activate this pls explain step by step. We saw someone done this.if we do it ,we will give you everything Thx for help
 

English: What do I need to change in the settings so that the brightness of the interior and dashboard changes from the RCC screen, and not just from the C4B7 dashboard ?


Русский: Что нужно изменить в настройках, чтоб яркость салона и приборной панели изменялась с экрана RCC, а не только с приборной панели C4B7 ?
 

English: What do I need to change in the settings so that the brightness of the interior and dashboard changes from the RCC screen, and not just from the C4B7 dashboard ?


Русский: Что нужно изменить в настройках, чтоб яркость салона и приборной панели изменялась с экрана RCC, а не только с приборной панели C4B7 ?

diagbox /Bsi configuration/vehicle configuration/lighting and signaling

or arduino

>752:652
1003
:E4D8:03:03 (this depend what type of bsi you have that's for bsi2010)

222407 read actual state

2E2407XX write where xx is the setting from diagbox 01/02/03/04/05 (2E is write new setting command)

config lighting signaling.png
 
Dernière édition:
  • J'aime
Reactions: Almeria63

Ciao @Nino19 , purtroppo non è possibile, per fare ciò devi cambiare quadro strumenti o montare rt6

Hi @Nino19 , unfortunately it is not possible, to do this you have to change the instrument panel or mount rt6

Grazie mille!
Altra domanda: è possibile aggiungere "Argomenti"?
Vorrei mettere un colore bianco o blu.
Ma menù ho aggiunto:
- Ambience menu 4 - 5 - 6 - 7 - 8.

Funziona solo il numero 4.
5, 6, 7 e 8 non sono attivi.
Pensavo se si potessero personalizzare!

Thanks so much!
Another question: is it possible to add "Topics"?
I would like to put a white or blue color.
But menu I added:
- Ambience menu 4 - 5 - 6 - 7 - 8.

Only number 4 works.
5, 6, 7 and 8 are not active.
I thought if they could be customized!
 

Grazie mille!
Altra domanda: è possibile aggiungere "Argomenti"?
Vorrei mettere un colore bianco o blu.
Ma menù ho aggiunto:
- Ambience menu 4 - 5 - 6 - 7 - 8.

Funziona solo il numero 4.
5, 6, 7 e 8 non sono attivi.
Pensavo se si potessero personalizzare!

Thanks so much!
Another question: is it possible to add "Topics"?
I would like to put a white or blue color.
But menu I added:
- Ambience menu 4 - 5 - 6 - 7 - 8.

Only number 4 works.
5, 6, 7 and 8 are not active.
I thought if they could be customized!
No purtroppo i temi non possono essere modificati, i vari colori cambiano in base al marchio che si sceglie, citroen, Peugeot, ds ecc


Unfortunately, the themes cannot be changed, the various colors change according to the brand you choose, citroen, Peugeot, ds etc.
 
  • J'aime
Reactions: Nino19

diagbox /Bsi configuration/vehicle configuration/lighting and signaling

or arduino

>752:652
1003
:E4D8:03:03 (thsi depend what type of bsi you have thats for bsi2010)

222407 read actual state

2E2407XX where xx is the setting from diagbox 01/02/03/04/05 (2E is write new setting command)

Voir la pièce jointe 20288
Hi Marcins!
This is helpful info. Do you have more of this data with the list of everything from the BSI ?
 
  • J'aime
Reactions: SylvainWzr


Hi Marcins!
This is helpful info. Do you have more of this data with the list of everything from the BSI ?
First of all many thanks for @VLud & @bagou91 for creating this amazing tool via Arduino support.

Would be nice if most all of you provide an tutorial of what options were successfully created and working with Arduino config as well as BSI2010 configuration of options wich appear on Driving functions and Vehicle settings on NAC display


I succesfully made working some of it with on/off touch button:


1. DRL (daytime running light)

BSI->Repair->Configuration->Configuration with displaying of the parameters->Manual Configuration->Vehicle Configuration->Lighting-Signalling:
-Presence of the daytime running lamps function in the personalisation menu->YES
-Lighting of the day running lamps by default->NO

Arduino parameters:
2127
Vehicle Menu 3->Headlights
Vehicle Menu 3 item 1->Daytime running light

This is having effect only on daylight with the engine stoped; go to nac display at the Vehicle settings->Daytime running lamps and switch to Off. After that start the engine; you will see DRL is off. With the engine started if you decide to switch ON it will start, but it wouldn’t gone off even if you decide to switch it to OFF, untill the engine is stoped.

At the night when you start the engine, even if DRL is switch to off, the DRL is starting automaticaly with the main beam. I still working on that.


2. Automatic Parking Brake

BSI->Repair->Configuration->Configuration with displaying of the parameters->Manual Configuration->Vehicle Configuration-> Driving Assistance:
-Presence of the menu for the electric secondary brake in the personalisation menu->YES

Arduino parameters:
2127
Vehicle Menu 2->Safety
Vehicle Menu 2 item 1->Automatic parking brake


3. Get rid of rear camera information about checking surrounding as well as gridlines:

Arduino parameters
2106 uncheck following:
-Legal notice displayed on the multifunctiontouch screen
-Display of the manufacturer on the visual reversing assistance camera


4. Parking Sensors

BSI->Repair->Configuration->Configuration with displaying of the parameters->Manual Configuration->Vehicle Configuration-> Driving Assistance:
-Type of acquisition of the parking assistance deactivation switch->Via the touch screen


Arduino parameters:
2100
-Parking assistance: Function present at the front rear and side.
-Physical button Parking Assistance: Unchecked
-Touch button position Parking Assistance: 6 (could be different for you)
-Display touch button Parking Assistance: Checked

This configuration enable the touch screen control of the parking assistance sensors but disable the control of the physical button.



Options shown on my display but not working with on/off
-Traction Control (ASR)
-Blind Spot Monitoring
-Adaptove Cruise Control
-Adjusting Speed


Options shown on my display but working with on/off
-Parking Sensors
-Under inflation initialization
-Door unlock: driver only
-Door unlock: boot only
-Motorized tailgate/door
-Automatic parking brake
-Rear wiper in reverse
-Welcome lighting
-Guide-me-home lighting
-Directional headlamps
-Daytime running lamps
-Driver welcome



Feel free to try but also provide your working configuration.
 

First of all many thanks for @VLud & @bagou91 for creating this amazing tool via Arduino support.

Would be nice if most all of you provide an tutorial of what options were successfully created and working with Arduino config as well as BSI2010 configuration of options wich appear on Driving functions and Vehicle settings on NAC display


I succesfully made working some of it with on/off touch button:


1. DRL (daytime running light)

BSI->Repair->Configuration->Configuration with displaying of the parameters->Manual Configuration->Vehicle Configuration->Lighting-Signalling:
-Presence of the daytime running lamps function in the personalisation menu->YES
-Lighting of the day running lamps by default->NO

Arduino parameters:
2127
Vehicle Menu 3->Headlights
Vehicle Menu 3 item 1->Daytime running light

This is having effect only on daylight with the engine stoped; go to nac display at the Vehicle settings->Daytime running lamps and switch to Off. After that start the engine; you will see DRL is off. With the engine started if you decide to switch ON it will start, but it wouldn’t gone off even if you decide to switch it to OFF, untill the engine is stoped.

At the night when you start the engine, even if DRL is switch to off, the DRL is starting automaticaly with the main beam. I still working on that.


2. Automatic Parking Brake

BSI->Repair->Configuration->Configuration with displaying of the parameters->Manual Configuration->Vehicle Configuration-> Driving Assistance:
-Presence of the menu for the electric secondary brake in the personalisation menu->YES

Arduino parameters:
2127
Vehicle Menu 2->Safety
Vehicle Menu 2 item 1->Automatic parking brake


3. Get rid of rear camera information about checking surrounding as well as gridlines:

Arduino parameters
2106 uncheck following:
-Legal notice displayed on the multifunctiontouch screen
-Display of the manufacturer on the visual reversing assistance camera


4. Parking Sensors

BSI->Repair->Configuration->Configuration with displaying of the parameters->Manual Configuration->Vehicle Configuration-> Driving Assistance:
-Type of acquisition of the parking assistance deactivation switch->Via the touch screen


Arduino parameters:
2100
-Parking assistance: Function present at the front rear and side.
-Physical button Parking Assistance: Unchecked
-Touch button position Parking Assistance: 6 (could be different for you)
-Display touch button Parking Assistance: Checked

This configuration enable the touch screen control of the parking assistance sensors but disable the control of the physical button.



Options shown on my display but not working with on/off
-Traction Control (ASR)
-Blind Spot Monitoring
-Adaptove Cruise Control
-Adjusting Speed


Options shown on my display but working with on/off
-Parking Sensors
-Under inflation initialization
-Door unlock: driver only
-Door unlock: boot only
-Motorized tailgate/door
-Automatic parking brake
-Rear wiper in reverse
-Welcome lighting
-Guide-me-home lighting
-Directional headlamps
-Daytime running lamps
-Driver welcome



Feel free to try but also provide your working configuration.
Thx for the info , we see this on separate thread, but is not releated to the @king_george question , as with NAC you can't enable dissable settings in BSI , you need do it with diagbox , i posted howto do it without diagbox , with arduino and @VLud sketch + terminal UDS commands

No sense now ppl start here to post what they have working what not as that's depend of configuration of the car and ecus present or not

Some existing ecus have option to swith differ configuration some not , some are compatible with touch screen some only with push button .. and so on