[TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

Hi guys! After upgrading from a NAC Wave 2 to a NAC Wave 4, i'm facing some issues.
Today I spent some time trying to figure out why the NAC is assuming there are obstacles in front and behind my vehicle, even if I'm in a open field and there is nothing around my car.
The point is: every time I engage the R gear, the Visiopark shows the zoom view and the virtual top view shows red alerts like if there are obstacles close to both bumpers.
I tried to restore the original config file, change the vehicle and compared the W2 and W4 backups but couldn't identify different parameters.
The BSI parameters are correctly set as if I reinstall the W2, the issue go away.
There are no errors on AAS or any BSI related module.
Anybody can think about something I'm missing or had similar issue?
Attached pictures and my W4 config file.

AAS_1 picture was shot while I was parked with any obstacles close to the car.
AAS_2 picture was shot immediately after AAS_1, but I switched the gear lever from R to N.
AAS_3 picture shows the 2 right sensors working properly (the front right yellow and rear right white alerts).
AAS_4 picture show the 2 center front and 2 center rear sensors not working properly.

Thanks.

SOLVED.
The issue was caused by W4 specific parameter on 2133 tab.
 

Was nice to be here and help others how i can , but someone one talking bulshit that's im taking money for coding , and selling parts .... so please can this person have Own honour , come here and write this with proof ???? or will hide like dirty Rat. --let him fry in hell and his di*k no longer stands up for these lies---

As is easy like make shit , spok about someone do this ... and other things...

Seems like people nowadays don't know the purpose of a forum... and that's why I think that sometimes people should charge for it's services.
Don't be angry, don't waste your time, just block, forget and keep going. People like these aren't worth the time.
 
Dernière édition:
  • J'aime
Reactions: Seb70220

Was nice to be here and help others how i can , but someone one talking bulshit that's im taking money for coding , and selling parts .... so please can this person have Own honour , come here and write this with proof ???? or will hide like dirty Rat. --let him fry in hell and his di*k no longer stands up for these lies---

As is easy like make shit , spok about someone do this ... and other things...


@marcins I'm sorry for the baseless accusations that have been leveled at you! I understand that you are angry now, but I hope this does not stop you from collaborating again here on the forum. Your experience, like that of each of us, is an indispensable source for the survival of the forum! I personally thank you for what you have been able to share so far! I have fixed several problems with my NAC with your share. Thanks
 


Anyone could help me to disable the sound make for the automatic doors when are opening or closing (sound is something like pi pi pi pi pi until is closed o opened)? is that possible?
 






Guys, what i have to check or uncheck to make volume ( up and down ) to work? Mute is working.

edit:

the animation ( top line volume) is also showing when i am using the physical buttons ( steering wheel and on / off button from central console.
 
Dernière édition:



is it possible to load another calibration on the cirocco 3008? for example 508 or ds7?

I tried to upload but it takes a long time to download. hours!
 

Bonjour,

J ai un 3008 Wave 2 et j aurais voulu afficher le media sur le tableau de bord comme dans certaines 5008. Qq un sait il comment et quoi modifier?

Merci d avance
 

I enter the Nac unit from the serial console. (> 764: 664) after logging in, I unlock the ecu. (D91C) I write the region I want. But I am getting telcoding error in diagbox.
I did not print zone 2901. I wonder if the error is due to this?
 

bonjour.

Petit retour d'expérience : j'ai connecté un cirocco de 3008 a ma 308 pour voir ce que ça donnait, avec un adapteur fait en regardant tout les détails qui se trouvent sur cette discussion, voila ce qui fonctionne et ne fonctionne pas :
Sans surprise le bouton ESP inopérant. Les boutons sur le cirocco lui même fonctionnent luminosité et affichage diagnostique : pression pneu ok, temps restant vidange etc ... Le bouton du commodo essuie glace j'ai toujours accès a trajet 1 et 2 et conso instantanée.
La déconnection du start/stop fonctionne via le bouton. Et une autre chose qui ne fonctionne pas le bouton sport est inopérant :confused:.
J'ai réussi a enlever le voyant maintient dans la voie avec arduino .

Prochaine étape passer le LVDS vers le NAC, changer mon NAC pour un 2 LVDS et configurer celui ci. :bien:
 
Dernière édition:
  • J'aime
Reactions: nico1080

Hello @Seb70220 , tu as réussi également à binder une touche pour le changement de présentation de l'écran ?
Et pour l'affichage des panneaux, l'as tu ?
 

salut @Lusitanos67 , pour l'instant non je n'ai pas le changement de présentation de l'écran. pour l'affichage des panneaux je ne sais pas si ça fonctionne pour l'instant car je ne me suis pas déplacé avec la voiture. :)
 

Pièces jointes

  • Screenshot_20210430-205232_Gallery.jpg
    Screenshot_20210430-205232_Gallery.jpg
    263 Ko · Affichages: 42
  • Screenshot_20210430-205230_Gallery.jpg
    Screenshot_20210430-205230_Gallery.jpg
    187.8 Ko · Affichages: 44
  • J'aime
Reactions: Seb70220

Check this website, they sell old modeles of peugeot cars but with new tech on them , and is a Peugeot dealer!? For exemple...this old peugeot partner from 2004 - 2008 , is sell as new with 0 km on bord and have digital dash bord dials !?!

They still produce it, it's not old by their standards. ;)

https://www.peugeot.com.ar/gama-peugeot/peugeot-argentina/peugeot-partner-furgon.html

They got more interesting stuff like All-in-One (AIO) touchscreen radio which is based on NAC, with screen fixed to it. It's compatible with AEE2004.
 

Pièces jointes

  • AiO.png
    AiO.png
    156.1 Ko · Affichages: 29
Dernière édition:
  • J'aime
Reactions: Seb70220








[QUOTE = "Keryan, post: 2622653, member: 126947"] https://www.forum-peugeot.com/Forum/threads/seconde-monte-compteur-digital.123929/page-5
[USER = 131238] @Dravos [/ USER] [USER = 128472] @joan carlos [/ USER] Ho fatto uno schizzo e usando un multimetro ho trovato il pinout del modulo ESP, quindi Arduino invia frame quando si preme esp

[/QUOTE]

Salut Keryan pouvez-vous m'aider pourquoi pas j'ai ieda comment créer la carte pour la faire fonctionner esp citroen c4 grad picasso.
si vous pouvez créer pour moi, je suis prêt à payer pour le problème car je ne suis pas capable de le créer.
 
Dernière édition: