I would like to buy the 3D print side from you or anyone can do it. Or if cluster mask is possible. Thank you208 3 stage frame progress Voir la pièce jointe 20349
I would like to buy the 3D print side from you or anyone can do it. Or if cluster mask is possible. Thank you208 3 stage frame progress Voir la pièce jointe 20349
we just need the sketch for arduino@filippo.sara @joan carlos I will explain how it works when I have free time
And I will maybe do some cards ready to use for people which want me to do some, if I have time my problem is time X)
https://www.forum-peugeot.com/Forum/threads/seconde-monte-compteur-digital.123929/page-5
@Dravos @joan carlos I did a sketch and using a multimeter found the ESP module pinout, then Arduino is send frame when pushing esp
Do you sell your HD?So, after my first attempt (failed!) installing a Wave4 HD headunit into my 208, I am expecting a non HD version to arrive this week (yaaaaaay!).
As soon as I have it, i will flash it with the 208_I-9693364380.cal file. My question: can I then just copy the configuration of my current wave2 or do I have to use first the 208_A9_WAVE4.nac configuration and adapt it to my car?
Thanks
New 308 Digital Cluster, take a look here:Wich Icockpit are you using? Can you send me the reference?
I´ve tryed the 3008 one in the 508 phase 1 but it doesn´t fits quite well
im done 208GTi 2015.... big thx for @Keryan (sketch) and others ...
Working perfect, but with contact and engine off off.Latest cirocco.exe app not works with load .cal/.ulp same problem here ...
Try with engine off, cirocco should be off, tell me if it's working.is it possible to load another calibration on the cirocco 3008? for example 508 or ds7?
I tried to upload but it takes a long time to download. hours!
Guys, any posibility to disable AdBlue via Arduino?
Do you sell your HD?
Try with engine off, cirocco should be off, tell me if it's working.
Wich Icockpit are you using? Can you send me the reference?
I´ve tryed the 3008 one in the 508 phase 1 but it doesn´t fits quite well
Rip I need one lol
3008-5008-508-c5 aircross-c4-DS7 same size cirocco differ FW the new digital 308 maybe 1cCan you make me one device to my 508 2014 to put ciroco dials ? Thanks
I will pay all your efort, and can you tell me what ciroco dials are fit to put on my car to fit in the dash..from 3008, 308, 508 ?
Thanks lot
hello when engine off and cirocco off not working for me a message appear : "DNX FLASHER Version : 10.1b. Actual Software version : 10.8a " and i can do nothing ?? now cirrocco rest like this
This work for me well, did u try to write different firmware?hello when engine off and cirocco off not working for me a message appear : "DNX FLASHER Version : 10.1b. Actual Software version : 10.8a " and i can do nothing ?? now cirrocco rest like this
I.have a 508 2014 to, can.you send me pic with your dials to se how big they are ? Thanks
They won´t fit without cutting the dashboard