[TUTO] Remplacement SMEG+ par un NAC Wave2 sur 308 T9 (+ BTA 2.0)

Oui (si le numéro de série n'a pas été blacklisté depuis Diagbox 7)
Oui (avec un token a 42€ TTC)

;)
 



Si l’interface fonctionne sur Diagbox 7 elle fonctionnera sur Diagbox 9

Oui
Jai une version 9.68 rorry
Donc je suppose que c'est good alors super
Moi qui aime pas trop allez chez le concessionnaire.... si jai un téléchargement je pour le faire en dernier recours..
Et quand on prend un token cest valable pour un seul téléchargement et une semaine de diag c sa ?
 



Jai une version 9.68 rorry
Donc je suppose que c'est good alors super
Moi qui aime pas trop allez chez le concessionnaire.... si jai un téléchargement je pour le faire en dernier recours..
Et quand on prend un token cest valable pour un seul téléchargement et une semaine de diag c sa ?
Hello,

I did looked on my NAC, you can find the "email" icon in Phone (icon from the nac) - Options - Email
Also, is working as long as you don't activate Android Auto/Apple Carplay, because the button with the phone will take you to their menu.
 
  • J'aime
Reactions: MacSlavko

Thanks for this!!
I will look into that as soon as I install my NAC back into DS5! So far that green notiffication flag only alerted me of the dreaded deNOx fault and guided me to the nearest authorised garage, Lol...
Currently with factory SMEG+IV2 again, awaiting for a cable from AliExpress to connect CD player to the NAC as my previously bought conversion cable is aparently missing that yellow part. Not that I use CD player realy, but want everything to be in working order...
 

bonjour a tous,

Ayant passer du smeg au nac il y a plusieurs mois sans problemes, je me suis rendu compte qu’en mode navigation a partir du nac, je n’ai pas l’affichage du panneau de la vitesse limitée, c’est normal?
Merci d’avance.
 


Hello,

Est il possible d'avoir un nouveau lien pour le faisceau convertisseur nac ou la bonne ref delphi/aptiv, le précèdent lien est hs.



Merci
 


Ok merci.

Je pensais qu'il existait une référence plus "haut de gamme" , car après vérification c'est bien la même que j'ai, et de temps à autre j'ai la connexion de la cam ar qui ne fonctionne pas. Dommage
 



I did looked on my NAC, you can find the "email" icon in Phone (icon from the nac) - Options - Email
Also, is working as long as you don't activate Android Auto/Apple Carplay, because the button with the phone will take you to their menu.
Looked all over the Tel options (iPhone connected and working fine, not plugged in so CarPlay not active), but struggling to find that e-mail option...
Am I missing something?
Btw, I never received any notiffication on that "page" button in the upper right corner of the screen (next to the cogs/settings). I understand it should become green if an SMS or an e-mail is recieved on the phone? Maybe it's just a coincidence of not receiving anything whilst driving (done only shprt distances lately...)?
It's a NAC Wave2 with latest software in a DS5.

Thx!
 

Pièces jointes

  • IMG_2101.JPG
    IMG_2101.JPG
    397.2 Ko · Affichages: 60

[QUOTE = "VLud, post: 188377, member: 108646"] Putting the VIN of another car would work but the NAC would beep every 5s (because VIN different from that of the BSI), not viable. [/ QUOTE]

One queston, when i am looking the interior equipment to verify match, where i see if it has auto parking? For example with this VIN you shared in page 1. VF3LJEHZRJS100490
 

You probably reversed the + and the - of the video

SMEG B1 = PIN 17 NAC
SMEG B7 = PIN 16 NAC

Please check that :)

Bonjour @VLud, Je te remercie pour ton tutoriel très bien expliqué mais je bloque encore sur le fait du branchement de la caméra ou il faut inverser des pin, je n’arrive pas à visualiser lesquels exactement ils faut modifier, peux tu m’aider s’il te plaît ?
 


I have problems with front right (driver) speaker on 508 which makes buzzing sound sometimes. There was no problem with the SMEG. At first I thought it is because I have made my own wiring converting SMEG> NAC. Now that my Chinese converter arrived and I replaced it but the bad speaker is here again. (I even experience some problems with the rear view camera, probably the cable is bad too). Could it be something I need to tweak in terms of settings / telecoding, or just my speaker probably is broken?
The 508 is with regular sound system + CD (no JBL etc.)

My second problem is with the parking lanes. Back on the SMEG, the side lanes were perfectly reflecting the width of the car.
Now the SMEG seems to show that the car is wider, like 10 cm more on both sides, can this be adjusted?

EDIT:
One curious question. It seems my donor card Citroen C3 Aircross, is coming with the free "Real time traffic service". I have created account, enabled the service (it wasn't claimed for that VIN). So now I have active service to 2024. The thing is, if I change the VIN of the NAC to this C3 VIN, should I be able to activate the live traffic, then go and return to my current VIN of my 508, so it won't beep non-stop?
The thing I am struggling now is that I cannot try the above scenario, as seems my NAC does not want to connect to WI-FI due to some reason. It used to be OK and was connecting just before my attempt to change to C3 VIN. Now no matter which VIN I use, Wi-Fi only says connecting> Internet connection lost ....

EDIT2:
Is there a way, to make my outside temperature be showing nonstop, even when android auto is enabled?
upload_2021-8-8_13-46-55.png
 
Dernière édition:

Looked all over the Tel options (iPhone connected and working fine, not plugged in so CarPlay not active), but struggling to find that e-mail option...
Am I missing something?
Btw, I never received any notiffication on that "page" button in the upper right corner of the screen (next to the cogs/settings). I understand it should become green if an SMS or an e-mail is recieved on the phone? Maybe it's just a coincidence of not receiving anything whilst driving (done only shprt distances lately...)?
It's a NAC Wave2 with latest software in a DS5.

Thx!
Hello,

Sorry for the late reply, i was in holiday. I don't recall to have something special set up. Will try with my iphone today, and see if there is something to check. I do get the green notifications also for SMS/email.
I have NAC Wave2 with 308 software.

Thank you.
 
  • J'aime
Reactions: MacSlavko

Looked all over the Tel options (iPhone connected and working fine, not plugged in so CarPlay not active), but struggling to find that e-mail option...
Am I missing something?
Btw, I never received any notiffication on that "page" button in the upper right corner of the screen (next to the cogs/settings). I understand it should become green if an SMS or an e-mail is recieved on the phone? Maybe it's just a coincidence of not receiving anything whilst driving (done only shprt distances lately...)?
It's a NAC Wave2 with latest software in a DS5.

Thx!

Hey,

I did try with my iPhone XR, and the options are not there. It only works with Android.
 
  • J'aime
Reactions: MacSlavko

Hello,

Je viens de voir que si l'on active la ventilation mono via l'écran tactile, la clim se met automatiquement en route. C'est normal docteur ?

Nac modifié avec le prog v1.2.6
 



Bonjour a tous!

J'ai une 308 II 150ch finition FELINE de 2014, et je ne sais pas si le DSP a été pris à l'époque par le premier propriétaire... On est d'accord que je devrais voir une différence dans l'affichage du tableau de bord etc non?

S'il ne l'a pas pris, comment puis-je l'activer? Est-ce possible de l'activer en fait?

Je me pose cette question en aillant vu le début du thread qui parle de VIN et de "choisir" ses options.

Merci à ceux qui prendront le temps de me répondre!
 

Salut les amis. Peut-être que quelqu'un a été confronté à ce problème. J'ai remplacé mon SMEG+ par du NAC Wave4 sur ma 308 T9 SW 2015 (logiciel mis à jour Wave3), téléchargez un étalonnage Wave4 et maintenant j'ai un problème avec les capteurs de stationnement.
Premièrement, ils n'émettent pas de bip.
Deuxièmement, il n'y a pas d'image de voiture sur mon écran, lorsque j'ai un obstacle devant ma voiture.
Troisièmement, ils émettent un bip lorsque j'utilise la marche arrière, mais sans image de voiture et sans ces lignes de stationnement (je veux dire les lignes du radar).
J'ai essayé tous les blocs de configuration associés, mais cela n'a pas aidé.
---
Hi, friends. May be someone has faced with this problem. I replaced my SMEG + with NAC Wave4 on my 308 T9 SW 2015 (software updated Wave3), upload a Wave4 calibration and now I have a problem with the Parking sensors.
First, they don't beep.
Second, there is no car image in my display, when I have an obstacle in front and rear of my car.
Third, they do beep when I use reverse, but without a car image and without those parking lines (I mean lines from radar).
I tried all related config blocks, but it didn't help.

-----
I played with a config and it seems that I resolved my problem.
-
J'ai joué avec une config et il semble que j'ai résolu mon problème.
 
Dernière édition:
  • J'aime
Reactions: MacSlavko

Bonjour, je souhaite installer un nac en place du RT6 actuel , déja fesable ou pas ? si oui est-ce que l'on conserve les informations lié à mon modèle hybride (info batterie, etat de charge ...) merci
 

Yes, it's possible and you keep all the info regarding the hybrid (battery and stuff...) but all the settings must be telecoded right with Arduino tool so you need that well discussed with seller!
Apart from the new screen, cable adapters and NAC telecoded to your car, depending on which car you want to do it you may need some other parts (ie front panel if the media buttons are different)...
 

Pièces jointes

  • KMAP4307.jpeg
    KMAP4307.jpeg
    261.1 Ko · Affichages: 37
  • IMG_0883.jpeg
    IMG_0883.jpeg
    154.1 Ko · Affichages: 36

Bonjour et bravo pour ce super tuto.

Je viens de faire l'acquisition d'une 308 GTI de 2016 et avant de me lancer dans l'achat du matériel, je voulais être sûr que ce modèle était bien compatible avec votre méthode pour le remplacement du SMEG par le NAC ?