[TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

Thx for the info , we see this on separate thread, but is not releated to the @king_george question , as with NAC you can't enable dissable settings in BSI , you need do it with diagbox , i posted howto do it without diagbox , with arduino and @VLud sketch + terminal UDS commands

No sense now ppl start here to post what they have working what not as that's depend of configuration of the car and ecus present or not

Some existing ecus have option to swith differ configuration some not , some are compatible with touch screen some only with push button .. and so on
Indeed, these configs are available only if you`re using Diagbox, not terminal; also I figure iti out working on my car which has BSI2010, Peugeot 508 RXH 2015
 


Indeed, these configs are available only if you`re using Diagbox, not terminal; also I figure iti out working on my car which has BSI2010, Peugeot 508 RXH 2015
When you read again what is asking @king_george you will understand thst's not asking where to activate with diagbox only howto activate more commands ID without using Diagbox but in BSI , i have posted in threads above... using only arduino..
 






  • Europe (y compris Russie): Téléchargement (20.0 - Février 2021) - Miroir
  • Algérie: Téléchargement (19.0 - Février 2021)
  • Afrique (y compris Île de la Réunion, Maurice, etc.): Téléchargement (19.0 - Février 2021) - Miroir
  • Israël: Téléchargement (19.0 - Février 2021)
  • Amérique Latine / LATAM (y compris Guyane, Martinique, Guadeloupe, Saint-Barthélemy, Saint-Martin, Brésil, Mexique, Colombie, etc.): Téléchargement (20.0 - Février 2021) - Miroir
  • Asie du Sud-Est (Singapour, Hong-Kong, Philippines, Indonésie, Thaïlande, etc): Téléchargement (18.0 - Juillet 2020)
  • Océanie (Australie, Nouvelle-Zélande, etc.): Téléchargement (18.0 - Juillet 2020)
edit modo : RAPPEL : liens hors sites officiels interdits. Le prochain post avec ce type de liens sera supprimé sans avertissement.
 
Dernière édition par un modérateur:
  • J'aime
Reactions: Dravos

diagbox /Bsi configuration/vehicle configuration/lighting and signaling

or arduino

>752:652
1003
:E4D8:03:03 (this depend what type of bsi you have that's for bsi2010)

222407 read actual state

2E2407XX write where xx is the setting from diagbox 01/02/03/04/05 (2E is write new setting command)

Voir la pièce jointe 20288
English: On the Citroen C4 Sedan, this procedure did not give any effect
********
На Ситроен С4 Седан, данная процедура не дала ни какого эффекта
 


Bonjour,
J'ai eu l'occasion de voir sur une Nouvelle 2008 que les rétroviseurs électriques se baissent légèrement en marche arrière afin de voir les bordures de trottoir.

Vous sauriez si ce genre d'options pourrait se transposer sur une Nouvelle 208 qui dispose également des rétroviseurs électriques ?

Dans l'outil PSA-Arduino-NAC, en jouant sur l'affichage de l'option concernée dans les menus du véhicule sur le NAC, celui-ci n'apparaît pas pour autant.

Merci d'avance.
 

@VLud please help, can I use calibration from 3008 to 508 for cirocco? Or where can I find for 508? Can I save my curent calibration?
And second, signs with restriction not appear on cirocco and partial millage
 

Pièces jointes

  • 16173560152772839571840875991743.jpg
    16173560152772839571840875991743.jpg
    998.4 Ko · Affichages: 65

For those who need connection for subwoofer and center at nac.
Pin +40 and - 51 = subwoofer
Pin +41 and - 52= center
In nac u have to select standard amplifier.
thanks to @Mittns
 
Dernière édition:
  • J'aime
Reactions: Calico



Hi, everyone!
Anybody can check voice command for input desination on navigation 20 version nav?
After update search by voice not working (( and also after that not working all voices command ((
 


Bonjour,
J'ai eu l'occasion de voir sur une Nouvelle 2008 que les rétroviseurs électriques se baissent légèrement en marche arrière afin de voir les bordures de trottoir.

Vous sauriez si ce genre d'options pourrait se transposer sur une Nouvelle 208 qui dispose également des rétroviseurs électriques ?

Dans l'outil PSA-Arduino-NAC, en jouant sur l'affichage de l'option concernée dans les menus du véhicule sur le NAC, celui-ci n'apparaît pas pour autant.

Merci d'avance.
Ce n'est pas seulement un logiciel, un module de porte avec cette fonction et un miroir avec une fonction de mémoire sont nécessaires pour cette fonction. Et puis activer dans BSI. Il y a des collègues qui ont effectué ces fonctions mais qui achètent ces équipements supplémentaires.
 
  • J'aime
Reactions: Calico