Contenu récent par bilalemint

  1. B

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    I don't know the answer to your question. But what is this program? Can you share it with us?
  2. B

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Hello everyone. I activated the ACC system in my c5 aircross vehicle. I had tried this many times before but I found that the ESP90 ECU was incompatible. I replaced it with an ESP90 ECU from another C5 aircross that had ACC and ACC worked. There were a few other faults. I solved all of them by...
  3. B

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    You have to activate it in BSI Also.
  4. B

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Thank you very much for your work. It was very useful. If you want to do this for other ECUs, I can help you.
  5. B

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    I did not have enough information about this problem. So I can not help you.
  6. B

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Hello everyone. I want to share my Arduino USB with @mark102 to enable the ACC system in my vehicle. We tried using the USB redirector program and I can share my other USB connections but I can't share my Arduino USB. Can anyone help me with this?
  7. B

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    I do not know zone adress. But in cirocco app you can find as “start/stop function” not system
  8. B

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    https://www.forum-peugeot.com/Forum/attachments/bsi_en-json-zip.33012/ You can find values in there
  9. B

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    I remember that as 2373. You have to activate in CVM and Cirocco also
  10. B

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    I did not understand this exactly
  11. B

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    I think it is releated with esp ECU. I will chance it via another with ACC
  12. B

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Yes belt is buckled. Tire pressure is ok. And active safety brake is on