Vous utilisez un navigateur techniquement dépassé et avec des failles potientielles. Il se peut que notre site ansi que d'autres aient des problèmes d'affichage par sa faute. Vous devriez le mettre à jour ou utiliser un navigateur alternatif.
@VLud
Thanks for adding the Webasto support option.
But I have another problem. The car is equipped with a Webasto activated with a key. I opened the 210D menu, everything was off by default. I turned on 3 parameters, the PreHeat Menu appeared, but after pressing there is only a beep and nothing...
Does anyone have a Traveller / Spacetourer / Zafia / ProAce with Webasto and a menu on the NAC / RCC radio to operate Webasto (not only from the remote control)?
Second try.
I have a BSI with C4 Cactus 2018, what pins to connect to the BSI to start NAC and display?
BSI - NAC
2V NR - PIN 1&2 - +12V
16V GR - PIN 16 - GND
60V NR - PIN 26 - GND
16V VE - PIN 9 - +12V -> NAC
60V BE - PIN 29 PIN 27 - CAN H/L -> NAC
NAC - LVDS oryginal cable.
And nothing...
@VLud tab No. 2108 -> Vehcile model 0x0C Wave 3 Peugeot 308; 0x04 RCC A2 Citroen Berlingo.
How to activate dual-zone air conditioning, as if everything was set as in the second car in the tab No. 210D but only one-zone works?
Radio after SMEG / NAC shift Peugeot 308 T9 2015.
https://media.peugeot.co.uk/file/77/8/instructions-for-updating-the-navigation-system.489778.pdf
I understand that you did by. manual and not working?
No .key file is needed to update the map.
Hi.
I bought a second NAC and a display to play in the workshop. Unfortunately, I failed to connect it.
But from the beginning.
It has NAC Wave3 DAB and DGT7CFF display
According to the PINOUT schedule for NAC
PIN 11 - + 12V
PIN 22 - GND
PIN 10 - CAN High
PN 21 - CAN Low
For this you also...
Ce site utilise des "témoins de connexion" (cookies) conformes aux textes de l'Union Européenne. Continuer à naviguer sur nos pages vaut acceptation de notre règlement en la matière.