Contenu récent par horuscurcino

You probably will have to tweak a little of the sketch to make it work but most of the conversion depends on the BSI CAN2004 received messages which you car does not send so it should skip these parts of the code

Yes, you only need to put the converter between the telematics and BSI CAN lines so it will act as a proxy and do what you want.

You can build the vLuds arduino converter to spoof the VIN to the telematics. There is a section for this on the sketch. https://www.forum-peugeot.com/Forum/threads/tuto-adaptateur-pour-smeg-nac-matrice-can2010-sur-bsi-can2004.18068/

I recommend to enable warnings and alerts on your navigation unit as contingence for the messages CIROCCO is not showing.

This constitute SPAM as you do not pay attention or seem to not have any effort to check, read, assimilate, try to understand or make statements (the basic think process) about what people are saying here.

There is something special to say about my C5 X7. I did some readings on the CANBUS and noted all the warnings and alerts being sent EXCLUSIVELY to the original cluster address instead of the common telematic/multimedia/multifunction screen warning addresses. The CIROCCO and COMBINE_UDS_EV...

Yes it will

You asked me for "more information about the sketch you posted". Which information you need about the sketch? We can discuss publically so it would help others. By the way on this thread we already have all the necessary to make it work

Here is the sketch a friend (Felipe Migliori) and me developed to convert the messages from CAN2004 to CAN2010 for CIROCCO use. We have tested on Citroen C5 and DS3 with good results. Some of this sketch was already implemented to this vLud work. There are some improvements to the fuel and...

Trying to revert my EV cluster. Unfortunately CIROCCO app does not recognize the CAL files for UDS_EV. EDIT: Ive fooled the software editing the 2nd line from CAL file and reverting it before the dialog box confirmation. It starts to flash but hangs on unlocking confirmation. The sketch does...

Is there any video recording (iDVR) function for these NAC variants? I mean if there are certain codecs to view these files we can take advantage of it and just find a way to enable the menu. Perhaps accessing the file system directly and injecting the necessary codecs is another option if the...

Just to share: I have a RCC_CN radio bought from Ali and found it does not have the necessary components to make Central Speaker and Subwoofer works so it is not calibration/configuration related, for those who is experiencing the same. Bosch RCC A2 works normally (tested here).

When the official document says "track not connected" it is related to limitations on the vehicle you are viewing. For example when you search for the pins descriptions under C4 Gran Picasso it says "track not connected" to many other pins which are already described on this 3008 page. CIROCCO...

All the CIROCCO panels have the pin to receive the actual buttons to turn OFF/ON the ESP and its lights like the older dashboard. There is a parameter on telecoding to activate this pin and make the panel handle the request. But at least in the 3008 calibration i was not able to make it work...

Most of the dashboard frames were already incorporated to the CAN2004-2010 converter from vLud