Contenu récent par Laleksss

  1. Laleksss

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    I can take you a photos, but I was made it from old dash + epoxy polymer, if you need - tell, I will take pictures for you. Also - im looking for 3d model for any scirocco dash from 3008 - it will be very helpful.
  2. Laleksss

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    I was do it )) https://ibb.co/gJ3HK8w
  3. Laleksss

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Seat memory needed only for mirrors memory ) (but, in Peugeot 508, in fact it used it's own memory)))) But, as I understand, Dursun want to fold mirrors vian NAC...
  4. Laleksss

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    No, its not possible without changing the BSI, because exactly BSI changed it. (Okay, that's theoretically possible, but you will need to assembly something like BSI, and allow that's device to control of your car)))
  5. Laleksss

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    The only one method, as I think: catch all frames from BSI, convert some data and send modified data to LCD, like Ludwig Can 2004 <> 2010 converter do.
  6. Laleksss

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    No, you don't need to see any sign. If you see it, that means that you have a new BSI, which have same frames in the can comfort line. Blinking caused by difference between SAME frames sended by BSI and Arduino. Example: Bsi send frame: 0x001 00 00 00 Arduino frame: 0x001 00 FF 00 Result...
  7. Laleksss

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    No, you dont need to modyfy anything on BSI. For checking, you can replace canMsgSnd.data[0] = 0xFF; in sketch to canMsgSnd.data[0] = 0x05; - if your scirocco and nac settings is ok, you will see some sign (as I remember - 5 KMH) on scirocco in the place, where NAC has no any information of the...
  8. Laleksss

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Try to change calibration at your NAC. It was help me with Cirocco from 3008.
  9. Laleksss

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Yep, that's correct. Also, that sketch, has some parasite code, you can clear it - all will work correct without it. I was use all that code for some debugging )) PS: you need to enable speed limit signs in the dashboard/lcd/hud, and disable showing it from the camera in nac. And this code...
  10. Laleksss

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Change last two digit (i'm really forgot for what you need to change it, sorry) 2100 1800
  11. Laleksss

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    As I remember: 08CF60005000018A090 but the magic is not in the zone :) https://github.com/laleksss/speed_sign_converter For arduino + only one MCP2551 Add it to CAN-Comfort and enable sign at the dash. In NAC you need to disable signs from camera.
  12. Laleksss

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Hi to all again. I have a lot questions about SPEED LIMIT signs on the dash. Is that infomation will be intresting for community?
  13. Laleksss

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Hi guys! I have new VISTEON VTH from K0. Is anybody knows unlocking key for it? I'm try to change coding, but that device is still locked :( Thanks for answer! :)
  14. Laleksss

    Nac et zone a risque sur écran matrice

    There's a post about nac config for that option: https://www.drive2.ru/l/599269297461662100/
  15. Laleksss

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    I just cut a lot of a face of base 508 dash ) Thanks! 1. Because doors was open ))) 2. I just showing some function, also that video was shooted for the drive2 ))))) 3. Airbag lite - main is showing at the dash, additional (for second passenger) - showing at ceiling panel