Contenu récent par RuLe

  1. RuLe

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Tentativo to modify zone: 0112 Calibration_Fct_NAV Take it from 3008 cal
  2. RuLe

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    My car was born with this accessory, so I haven't activated or added anything to my car
  3. RuLe

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    I do not know which accessory you should have for this function, I think that if you have the mirrors that can be closed with the key you can also have this function, for the hardware you must have a control unit in the door, in my citroen c4 b7 it is positioned in the passenger door
  4. RuLe

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    No, it does not need the memory of seats for this option, my car (c4 b7) has no seats memory and has this feature
  5. RuLe

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    You don't necessarily need the seat memory, my car has no seat memory but it has the tilt function
  6. RuLe

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    I deactivate the internet connection when the automatic procedure starts
  7. RuLe

    Arduino Sketch for 308/3008/508 Digital Cluster Retrofit

    I have the same problem too, and all the people who wrote in Ludwig's now-canceled discussions
  8. RuLe

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    The cirocco application is used like that of nac, same sketch without any change, if you browse the pages of the discussion there is written what and where to change, it is bad to repeat and always answer the same questions, and the discussion of useless things becomes polluted and superfluous...
  9. RuLe

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    I think it has nothing public, it uses its tools to work and to sell IntellilinkMods
  10. RuLe

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    @VLud did you buy a new car? New 308?
  11. RuLe

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    Cirocco for Peugeot 508 has a different graphic than Cirocco 3008, in fact as you can see it is narrower even at the ends and in the partial km part. For the arrow problem in navigation mode, you probably have a bad calibration / configuration of the nac, first try to set calibration and...
  12. RuLe

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    In fact the translator did not work well, I corrected the message, however the default theme chooses the color that must remain on the instrument panel when there is no theme matched the nac
  13. RuLe

    [TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

    On cirocco there are only 2 themes, with the first theme of nac you will have blue in cirocco, with the second theme nac you will have bronze on cirocco, for all the other active themes in nac you will have the default theme in cirocco, favors of the default theme number you will have the color