Eclairage de plaque et caméra recul

Deckard

Membre
16 Février 2020
9
2
3
Italy
Hi all, I apologize if I write in english, but my french is not so good (I use google translate to read your posts).
I have a problem with the reversing camera (camera de recul, right?).
I think it's a B2 revision, and I have never had problems on night vision.
I decided to change the original eclairage de plaque with led units (OSRAM LED Premium Cool White, 6000k, 70 lumen) but the night vision of the camera became darker and reddish. I also try the Philips X-tremeUltinon, 6000k, 45 lumen, but It's even darker...

Original bulbs


Osram Cool White


It may be caused by the brighter led light?
Some advice to avoid keeping original bulbs?
Thx for the answers,
Ciao :)
 
Dernière édition:

Hi,

I had the same problem when I changed the plate light bulbs, the problem was corrected when I also changed the reverse bulbs with LEDs.

It's the same with cameras, if you use the flash for a night photo, the colors will be very dark.
 
  • J'aime
Reactions: Deckard






@Deckard I have this ones much more cheaper then ledperfect
https://pt.aliexpress.com/item/32824515413.html?spm=a2g0s.9042311.0.0.2742b90aQla1sJ

This ones versus the original ones is the same tha day to night
I suppose the picture you posted of your original ones was taked in a street with some light.
This ones i suggest provide a very good ilumination and my tail lights are a little bit dark in that white area where are the reverse lights with dark film.
https://drive.google.com/file/d/15_e-vM9nizgjq5c0i7Q2vj__YyLwSQ2_/view
Cheers
 

It's a parking area with streetlamps.
Yesterday I ordered the LedPerf ones, I hope to solve the problem...
Thx anyway for the hint...