NAC Wave 2 -> NAC Wave 4 we have 208 GTI 2015 (A9)

[VTS_Tibi]

Hi, I am going to replace the NAC Wave 2 in my Peugeot 208 GTI (A9) - which I retrofitted over a year ago - as the existing Wave 2 unit is faulty, restarting often on hotter days and dropping out bluetooth.
I already have a non-HD Wave 4 - label photo attached (from a Corsa I believe - not 100% sure as it was from Ebay). And I also have the Arduino for coding.

My question is, would I need a 208 A9 AND Wave 4 specific configuration, or can I just use the one from Vlud's site (see screenshot) - this one just specifies 208, but not Wave 4?

Thank you

Tibor

 

[Jbs68]

To use a Wave 4 on your car, you don't need a specific Wave 4 but you need the right calibration file !
Means the calibration file for a Wave 4 AND for 208 (and no, the calibration file from the Wave will not work for the Wave 4)

 

[VTS_Tibi]

To use a Wave 4 on your car, you don't need a specific Wave 4 but you need the right calibration file !
Means the calibration file for a Wave 4 AND for 208 (and no, the calibration file from the Wave will not work for the Wave 4)

Thanks, that's exactly what I thought. The only criteria is it has to be a non-HD NAC for this car but otherwise it does not matter from which car it is from.

And yes, a Wave 4 and 208 A9 specific calibration. Any suggestion where I could get one from please?

Thanks