NAC W3 issue: no touch buttons

[mehdi1-1]

Hi friends,

I installed a Wave3 HD on a 208 with a standard screen, and I replaced the screen available on the site. However, I don’t have the menu buttons or any other buttons.

I’ve tried several configurations without success. I also tested all the available calibrations on GitHub, but none of them worked.

Do you have any suggestions or solutions?

 

[Kinlozen]

You also need to install the toggles in the dash

 

[mehdi1-1]

You also need to install the toggles in the dash

Thank you very much, I’ll look into it and keep you updated. Really great!