does it have to be with 2 shield v2? or can you adapt to 1 shild v2?Yes
no, since I don’t know what you want to do
does it have to be with 2 shield v2? or can you adapt to 1 shild v2?Yes
no, since I don’t know what you want to do
I have fitted a C5 aircross cirocco in my 2012 c5x7 I need to get the parking sensors esp buttons working this needs to be done with ArduinoWhat are you doing ? What do you want ?
@davidcentrale
MP impossible avant 10 interventions sur le forum.
Et c'est bizarre que le compteur de @tech73 soit à 1, je trouve 8 messages pour lui avec la fonction recherche. 8 c'est quand même plus près de 10!
Disclaimer: I WILL NOT BE RESPONSIBLE IN CASE OF DAMAGE IN YOUR CAR.
Hello, as asked by many of you, here the sketch.
It actually uses Dual CanBus feature, but you can easily turn it into a single one, with few edits.
Thanks @VLud for code inspiration, feel free to consult his topic to learn more about dual canbus.
Thanks @marcins @FelixdeVuist for beeing beta tester, and sharing some frames.
It actually replaces [SOURCE] key to fit like original.
Mine is placed in the following wiring:
COM2008 <=> Arduino <=> CAN
I am using 16Mhz card, you'll maybe need to adapt CAN_FREQ & CS_PIN depending on your hardware.
- - -
Here the sketch for speedsign, using Matrix sign & convert it into CVM Sign.
Sign can be disabled using the checkbox "Recommended speed" into NAC map settings.
The Arduino & his can card need to be placed into CAN INFO DIV for this (Matrix, Nac...)
Feel free to share your own sketch below.
@davidcentrale
MP impossible avant 10 interventions sur le forum.
Et c'est bizarre que le compteur de @tech73 soit à 1, je trouve 8 messages pour lui avec la fonction recherche. 8 c'est quand même plus près de 10!
I have the same problem too, and all the people who wrote in Ludwig's now-canceled discussions@davidcentrale
J'en reçois aussi avec compteur à zéro, mais jamais vu entre 1 et 9. Je sais qu'il y a au moins un trou dans la raquette. Mais je ne m'explique pas son compteur nettement inférieur au nombre de ses posts réels. Mais pas grave!
Update, prise en charge des fonctionnalités de l'ARTIV GEN1 sur Visteon 308.
Vidéo de présentation suivra lors du tuto pour 308.
OK, thanks for the helpFun fact: there’s no RTC
-> Wrong thread
hi.Changelog 2022/06/16: Fixed an introduced bug that blocks 1E9
Wie hat er das geschafft ? Kann mir das wer erklären ?@Keryan Güç, takviye, tork göstergesi?
hello, must be adapted.
More info here: https://www.forum-peugeot.com/Forum...e-compteur-digital.123929/page-5#post-2626628
Thank you for your answer. I had read that and was hoping that I do not have to re-pin the speedo . Next will be how to physically mount the digital speedo. Not really looking forward to cutting my dashboard...