1>you have ever at begining uploaded any calibration to this RCC with success?
when not leave it as is ... don't try to upload it
2> what sketch you use in arduino??
3> pase here log from arduino when restoring your configuration remove VIN and serial line (F190 and F18C)
4>open serial monitor in arduino with you tool conected and send line by line
>764:664
1003
222127
paste here reply
5>have you enabled also themes in cirocco with cirocco tool? as maybe now conflicting as cirocco themes are not anable
1. I haven't touched calibration at the beginning. I only attempted to upload it once it was suggested here as means to fix my problem. Still was never able to upload it
2. Initially i used 1.0, now it is 1.4, so far nothing changed
3. log attached
4.
62212701784400030F0001000000000000061704000000000000000709101A00000000000014181C00000000000000
5. no. Themes 1 to 3 worked fine without doing anything with cirocco. theme 4 at first did just nothing, i was able to select other themes and back. Caused problem only after i turned off engine with this theme selected. Cirocco screen working fine right now and tbh i'm reluctant to touch any of it's settings...
Right now head unit plays music from usb, if i remove usb stick it switches to radio and back. But i can't select source by wheel buttons or switch tracks. Reset by 10s hold of music button also not working but i can reset headunit by arduino. Since i can hear music i can also hear that parameters i change through arduino are being applied (like hi-fi amplifier).
Pièces jointes
Dernière édition: