Oui c'est ça, la calibration DS5 sur le topic est pour un Wave 2, tu sauvegardes ta configuration actuelle (du Wave1), tu met la bonne calibration (sur le Wave2), tu restaures ta config (sur le Wave2) et tu actives Android Auto et Carplay => Terminé
Oui c'est ça, la calibration DS5 sur le topic est pour un Wave 2, tu sauvegardes ta configuration actuelle (du Wave1), tu met la bonne calibration (sur le Wave2), tu restaures ta config (sur le Wave2) et tu actives Android Auto et Carplay => Terminé
Multilingue avec changement instantané (pas comme Diagbox), commencement des menus des ECUs, ça avance !
Quand j'aurais fini toute la base et les structures des JSON je pourrais publier et c'est là que tout le monde pourra rentrer en jeu pour la traduction, l'ajout des voitures, l'ajout des ECUs, etc
Beaucoup de boulot où l'union fait la force et où toute personne qui aidera gagnera sa place en crédit
It is possible remaining time from nac to be displayed on cirocco. I have cirocco from 508 and nac wave 2
YesI already have a Wave2 installed with 1 lvds connection. Once i´m going to install the CIROCCO I need to install another Nac with two LVDS connections.
To configure the second NAC is it enough to make a backup from the first one and then restore the file on the second NAC, or do I need to make something else?
Hi all guys, after making a wawe2 of an Opel Grandland I recovered an instrument and the radio from a 3008 so why not use the double lvd one ?? and here we are !! only problem the steering wheel controls and the EsP / ParkSistem controls ... do you have a solution for the controls or do I need to change the steering wheel?
P.S.
the frame of the painting is being worked on
Voir la pièce jointe 19082
what's this black part with dash connector?Here I am,
I attach to the post 2 files describing the combine 208 and Corsa f. (same for all cirocco 3008 etc. etc.)
I created an adapter to leave the wiring of my vehicle totally original, bought on amazon, an lvds cable later adapted to my instrument.
For the dashboard I cut the lower part to get an original or almost original effect but you can very well use fiberglass and adapt the fixing on the edge of the external mask of the panel.
for configurations nothing new ....
Monday comes the steering wheel of a 5008 hoping that my Com 2010 understands "which language the commands speak"
Voir la pièce jointe 19093
You need to reload the calibration, but I don't know if you can with arduino and cirocco toolhello i have a problem in my cirocco. black screen NDX FLASHER VERSION 10.1B. does anyone know how to repair? I try to open the arduino-cirocco but it fails and closes the software automatically.
what you did to end up with this?hello i have a problem in my cirocco. black screen NDX FLASHER VERSION 10.1B. does anyone know how to repair? I try to open the arduino-cirocco but it fails and closes the software automatically.
the problem is that the Arduino-cirocco software gives an error and closes automatically.You need to reload the calibration, but I don't know if you can with arduino and cirocco tool
Try on another pc, with Win7 I don't have these problems, on win10 yesthe problem is that the Arduino-cirocco software gives an error and closes automatically.
I also wanted to ask something: I read about this ban due to "commercial use", what I understand and actually support this politic. My fear is, if I enable and disable and read parameters and do back ups and and and on my own car (I am just testing now and of course modifying and restoring my back up), do I have to expect this "commercial use ban" at some point? I did not really understand how that works ...
That's something we should not talk about , when you don't use it to make money you safe Just we need respect this
(Je republie ici car je n'avais pas le bon fil de discussion) Salut à tous, mise à jour:
J'ai fait le codage mais la caméra de recul ne fonctionne pas, avez-vous des solutions (je joins des photos)? J'ai presque tout activé avec Arduino à la page 2105 et désactivé les 2 premiers éléments du menu 2106. Ma caméra de recul doit être à 130 °. Merci d'avance et merci à @VLud et à tous ceux qui ont collaboré aux travaux. (J'utilise un traducteur)
Voir la pièce jointe 19153
C'est vrai, je suis passé de SMEG à NAC, hier j'ai essayé de vérifier la connexion et cela avait l'air correct. Vous dites que je devrais vérifier avec un multimètre?smeg to nac? this is usually the Chinese cable making bad contact