[TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

[Laleksss]

I asked if it is possible to be programmed when you install NAC.

No, I don't find any solution for start it working from the NAC

 

[Dravos]

Peugeot 508 first gen. Nac + Cirocco - done Thank you guys for a lot of information, an thank you Vlud for your software!

Video:

And photo:
Voir la pièce jointe 23133

More photos is here: https://www.drive2.ru/l/597278631659585595/

please help me with face for cirocco

 

[Berk Morkoc]

@VLud when are you planning to release the first version of OpenDiag?

 

[mandraquinet]

First of all, I would like to thank @VLud and @bagou91 for providing a solution of coding NAC/RCC/CIROCCO units.

Really appreciate the effort you have contributed guys.


I have also designed a box for UNO+CanBus Shield with OBD2 connection through side CAN HIGH/LOW output as below;

Will share thingiverse link for stl files asap...

Thanks.

Hi,
Just to know if you have share yours files in Thingiverse ?
Thanks.

 

[Ricardo Santos]

Hi there,
After switching from rt6 to nac when making calls people on the other side hear a strange noise like electrical interference. Is there some kind of calibration to solve this problem?

 

[marcins]

Peugeot 508 first gen. Nac + Cirocco - done Thank you guys for a lot of information, an thank you Vlud for your software!

Video:

And photo:
Voir la pièce jointe 23133

More photos is here: https://www.drive2.ru/l/597278631659585595/

Nice
congratulation that's probably first complete 508 integration

-why doors looks like open?
-hard to understand what you talking on video
-the airbag light is possible to enable on LCD instead of additional plate on the right...

 

[Laleksss]

please help me with face for cirocco

I just cut a lot of a face of base 508 dash )

Nice
congratulation that's probably first complete 508 integration

-why doors looks like open?
-hard to understand what you talking on video
-the airbag light is possible to enable on LCD instead of additional plate on the right...

Thanks!
1. Because doors was open )))
2. I just showing some function, also that video was shooted for the drive2 )))))
3. Airbag lite - main is showing at the dash, additional (for second passenger) - showing at ceiling panel

 

[Dursun]

Hi there,
After switching from rt6 to nac when making calls people on the other side hear a strange noise like electrical interference. Is there some kind of calibration to solve this problem?

Yes sure i have this problem after reinstall calibration it was gone.

 

[pepelxl]

can you tell me why I can't unlock BSI_2010?

>752:652
OK

1003
5003

:E4D8:03:03
67036D693600
7F2735

 

[Albatros24]

@pepelxl

Which car ?

Maybe it's an _EV ?

//ECU KEY
//BSI_2010_EV B4E0
//BSI_2010 E4D8
//BSI_EV B001
//BSI B2B2

For my BSI, it is :B4E0:03:03

 

[pepelxl]

@Albatros24
C4 GP 2014
installed exactly BSI_2010, also tried BSI_2010_EV

 

[VLud]

Economy mode must be inactive, ignition must be on, engine must be off, else you can't unlock the BSI

 

[pepelxl]

@VLud , yes, everything is observed.

 

[VLud]

@VLud , yes, everything is observed.

What is your BSI hardware reference and calibration reference ?

 

[pepelxl]

@VLud
this is how diagbox is authorized
(a reference in the request)

752:2703
652:6703A88FA32E
752:22F080
652:62F0809674745380000D98066879800102FFFF0001FFFFFFFF
752:2704757A7F3D
652:6704

 

[VLud]

@VLud
this is how diagbox is authorized
(a reference in the request)

752:2703
652:6703A88FA32E
752:22F080
652:62F0809674745380000D98066879800102FFFF0001FFFFFFFF
752:2704757A7F3D
652:6704

F0FE zone ?

 

[pepelxl]

@VLud, not at the car anymore.

Spoileur: BSI2010

BSI2010 Идентификация загрузки данных Expert/Общий тест/Интеллектуальный коммутационный блок/Ремонт /Телезагрузка Vehicle\GEN\IDENTIFICATION_TELECHARGEMENT_GEN.s : 513_01

НаименованиеЗначение

ПоставщикContinental

06.41

Дата загрузки данныхНеизвестная дата

Реферанс программы или калибровки96 916 305 80

 

[Albatros24]

@VLud

Ces valeurs ne me semblent pas coller avec la Clé E4D8

652:6703A88FA32E
752:22F080
652:62F0809674745380000D98066879800102FFFF0001FFFFFFFF
752:2704757A7F3D

 

[VLud]

@pepelxl : Your key is C318
C4 GP made in Russia ?

 

[Albatros24]

C'est bon !

 

[pepelxl]

@VLud, no, the country of production is Spain

 

[pepelxl]

@pepelxl : Your key is C318

Thank you very much, SEED came up.
I understand that in this case you ran the result of the can parcels through the algorithm, but do you happen to know where diagbox stores the keys?

 

[Berk Morkoc]

H guys.

Do we need to write secure tracebility after coding an ECU except BSI?

Thanks!

 

[Berk Morkoc]

Is there any of you who has advanced traffic sign reading system but no adaptive cruise control can share the data located in CVM zone 2101?

 

[zecabg]

H Vlud ,
Is it possible to help ...
I have in PSA 2008 2017 and dead NAC EUR wave2 B2 DMT,
Unit not working, not start ... dead .
I wish tray to repair and me need info ...
Is it possible put unit NAC in recovery mode with some comand and update firmware ?

 

[akin33]

Hi guys,

I am trying to activate the park assist feature on my C5AC. However, everytime i try to write the AAS , i am getting an error that starts with 7F… How can i successfuly write it?

Thanks

 

[marcins]

Hi guys,

I am trying to activate the park assist feature on my C5AC. However, everytime i try to write the AAS , i am getting an error that starts with 7F… How can i successfuly write it?

Thanks

just read github 1-2-3-10-20 times and you get what to doo, don't try when you don't know what you doing...

 

[akin33]

@marcins @Albatros24


I've read but it doesn't say what the 7f2e33 error code is.

What is the 7f2e33 error code?

 

[Albatros24]

@akin33
Sorry, I don't know this code !

 

[Berk Morkoc]

@Albatros24
What was the problem that you faced with while trying to unlock the AAS ecu and how did you manage to solve it? What i think is that @akin33 is trying to unlock the AAS but cannot do it.