You need write calibration file to restore FMUX for your panel (as now they think is opel) 508_I-9692553180.cal or 508_I_SW-9692553380.calHi All ,
Is it possible to help ...?
I wish to change and coding my new unit = NAC wave2-b2dab-dmt = which be in Opel
In my car peugeot 508 RXH 2017 , becouse my old unit is dead.
Unit is same model
I have back up configuration from my old unit and i write configuration in new unit ... all working only front panel button not work.
I tray to write on line configuration but have error MSS899 ...
If I right ... me need calibration file for Peugeot 508 RXH NAC unit ?
Or is it possible to write calibration - from some simple car ?
Or is it possible some instruction to solved this problem ...
Regards
Zeca
I
Hate de tester l'opensource Diagbox !
If you don't like , why you Play with ?
thx ready got it working , only with 508 and c4II .cal in nac works POIs on cirocco , strange thats not work default in 3008 and 5008 where also is fitted cirocco@marcins wave 2 calibration for 508 ,if u need i can send u config from cirocco and from nac.
Bonjour @Seb70220,bonjour @nabil2106 de quels liens tu parles ? je viens de regarder sur plusieurs pages de la discussion et les liens fonctionnent
Bonjour @Seb70220,
La plus part des liens, exemple : première page #2 (https://github.com/ludwig-v/arduino-psa-diag/blob/master/TELEMAT_ZONES.md)
Un autre lien qui a été hébergé sur Amazon tout pareil.
Merci
Software is only for telecode NAC/RCC/Cirocco but HW you can telecode all ECU if you know what you doing ...L'outil ne sert qu'a télécoder le NAC, pas les autre calculateurs.--> lesoptions supplémentaires (alarme, remorque, régulateur adaptatif...) ne marcheront pas.
Pour l'écran tu parle de quel changement? (c'est peut être jouable)
Software is only for telecode NAC/RCC/Cirocco but HW you can telecode all ECU if you know what you doing ...
BSI Driving Assistance
Voir la pièce jointe 21333
Any way for dumping ourself Ecu Motor to disable Adblue?Hi,
I found adblue msg alerts and you must reactiv it on each start . Better to dump Ecu Motor.
Did you mean, we are telecoding BSI with diagbox 7.57 for Peugeot 3008For most people (my self included) it means we have to wait for @VLud open diagbox (or stay with diagbox 7.57)