Thx @VLud we can now code EMF_DGT_LVDS_BD (Key added to repo) touch screen
switch from Monotouch to Multitouch
Invert Display orientation
211000 Display not inverted /Monotouch
211002 Dsiplay Inverted/Monotouch
211080 Display not inverted/Multitouch
211082 Display Inverted/Multitouch
The sound under the steering column not music sound. Sound for change direction signal, for error...You can change the system sounds with the NAC. Enable “harmony sounds” with arduino app and then you can choose between 4 different sounds: classic, urban rhythmics, jungle fantasy and another one which I don’t remember.
Hi @Albatros24, practically at Opel I presented myself with a VIN of a Corsa F that had the parking assist activated, so with the diagbox opel program we entered the VIN of the car that had the active options, we carried out the automatic remote coding of the two AAS control units and DAE, then after I entered the BSI and had to enable the option and I have not found it if someone helps me. The only one I know has succeeded is @Hallahub@diluca80
Good evening,
"after having telecoded the two control units and the nac via Arduino"
Can you describe the changes made ? Which Calculator ? Which Zones? Which Values ?
Thank you !
[QUOTE = "Lusitanos67, post: 2575846, member: 29172"] What's cool is that thanks to this method, I was finally able to find the inter-vehicle time setting which had disappeared from the smeg to the nac.
Top !
[/ QUOTE]
This is exactly what I'm looking for! At the moment I have no way of changing ther inter-vehicle distance setting and it is fixed on 2seconds. May I ask with what parameters have to be adjusted to achieve this?
it does nothing because you have to code those two control units first but you get the park assist field in the nac?
you have to remote code the 2 control units so the button does not workYes, i have the button "park assist" with the "?" which gives me help on this function...
( with zone 210C modified )
you have to remote code the 2 control units so the button does not work
In fact I’m referring to the com2008 sounds for indicator, errors and seat belts.The sound under the steering column not music sound. Sound for change direction signal, for error...
I already replied you many times to phone call too since you have my phone number and you call me whenever you want. I already told you that most of BSI parameters can’t be modified using diagbox. I succeeded to enable park assist on my 208 because I have access to peugeot diagbox and I entered using the old Peugeot 208 menu which allows you to modify anything. I’ll say it again so everyone can learn.Hi @Hallahub I have to activate the park assist in the Opel Corsa F I already have the 12 sensors I read here on the forum that you have already activated the function on your car can you help me? At opel we managed to enter the bsi of the Opel Corsa F, the only problem x the activation of the assisted parking we go into repair then manual telecoding then vehicle configuration and other submenus come out you can tell me which menu I have to enter and which item I have to kindly activate
however, after having telecoded the two control units and the nac via Arduino works halfway, the assisted parking starts and after a while the "maneuver canceled" item comes out.
If you tell me in the bsi which voice I have to enable thank you greetings.
@diluca80
Ok, thank you for these explanations !
But here the dealer does NOT WANT to do it !
And with DB and a Token, there is now an RMI code that we cannot have !
What did you do in the NAC ?
thanks for the reply @Hallahub, but you didn't tell me that I could use the arduino console to enter the 2300 field and modify, sorry for the ignorance could you tell me the commands to use in the console thanks again anyway.Ti ho già risposto più volte anche al telefono visto che hai il mio numero di telefono e mi chiami quando vuoi. Ti ho già detto che la maggior parte dei parametri BSI non può essere modificata utilizzando diagbox. Sono riuscito ad abilitare l'assistenza al parcheggio sulla mia 208 perché ho accesso a peugeot diagbox e sono entrato utilizzando il vecchio menu della Peugeot 208 che consente di modificare qualsiasi cosa. Lo ripeto in modo che tutti possano imparare.
Per abilitare l'assistenza al parcheggio sono necessari 12 sensori di parcheggio, hardware e software compatibili. Se tutto è compatibile, devi solo telecodificare AAS, DAE, NAC e BSI. Non consiglio affatto di effettuare una codifica automatica del BSI utilizzando un VIN diverso. Se hai fatto tutto correttamente, puoi abilitare l'assistenza al parcheggio all'interno del BSI utilizzando la console arduino. La zona è 2300, il valore di “sensori posteriori e anteriori + telecamera” è 11, per la sola telecamera retromarcia è 10 e così via.. Non ricordo il valore esatto che ho sulla mia BSI, devo leggerlo quando ho un po' di tempo libero. Prova a giocare con la zona 2300 all'interno di BSI. Questo è tutto.
you can find everything on github.thanks for the reply @Hallahub, but you didn't tell me that I could use the arduino console to enter the 2300 field and modify, sorry for the ignorance could you tell me the commands to use in the console thanks again anyway.
You had right. ThanksIn fact I’m referring to the com2008 sounds for indicator, errors and seat belts.
Can’t understand what’s wrong with your wave 4 or whatsoever, once enabled in the nac wave 2 wave 3 or wave 4, and the menu displayed in the nac, it’s enabled for your nac, it will not work as a miracle, as Hallahub told you, you need to enable the settings in the BSI, DAE & AAS.@Hallahub
Thank you for all those informations !
But on my C5Aircross it's a WAVE 4, I don't know if there is a 2133 zone ... I'll look ...
What I can do is to read the modified zones while performing an auto coding and post them here
I am, of course, interested in your values !
Thanks !
Coding option for zone 2300XX Type d'aide au stationnement in BSI2010_EV@Keryan
"you need to enable the settings in the BSI, DAE & AAS."
Yes ... We understood ! But we don't know how to do it !
I found the Bytes to modify in AAS and DAE ...
But I can not write neither in AAS, nor in DAE with the software of VLud ! In NAC, it's OK !
I have a VIN from a C5 Aircross with Park Assist...