[TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino
- Démarrée par VLud
- Date de début
I was hoping that you (or someone else) know the zone we can use with the arduino?
Thanks for @afu1986 to provide me the hint.
I try to change the type of car form unknow-4 to new 2008 of Dashboard 2100 item.
The arrow icon has be showed .
@VLud @JonnyMnemonic
Very apprecaite your guideline ,I follow your step to try serval times but it's still not working for me.
The reverse image is also in the same situation. (I also modified "real top view height 1000 <> 2550 mm" for 212A)
I am not sure what step I am doing wrong.
Merci
/Nick
maybe you know the code to disable start/stop icon from dashboard?
Dernière édition:
I receive 7F317F after sending 3101DFC702
The car is a 5008 from 2019 with 1.6 Petrol (180HP) EAT8
Send: >6A8:688
Recv: OK
Send: 1003
Recv: 500300C80014
Send: 3101DFC702
Recv: 7F317F
Bonjour à tous! J’ai un souci pr compiler le fichier, j’explique ce que j’ai fait :
-J’ai installé le logiciel Arduino sur Windows 7
- j’ai DL le fichier zip du master et je l’extrait (https://github.com/ludwig-v/arduino-psa-diag/archive/refs/heads/master.zip)
-j’ouvre le dossier arduino-psa-diag et je lance le fichier arduino-psa-diag.ino (en tant qu’admin)
- j’upload arduino-mcp2515.zip et ArduinoThread.zip en faisant Sketch-> include library -> Add zip…
-j’ai un Elegoo UNO R3 et Can Bus Shield 2.0 donc je change la valeur en 9 à la place du 10
- je clique sur compile et PAF : voir photo
J’ai installé java en dernière version, j’ai lancé le tout en admin, j’ai changé de chemin d’installation rien n’y fait ….
-J’ai installé le logiciel Arduino sur Windows 7
- j’ai DL le fichier zip du master et je l’extrait (https://github.com/ludwig-v/arduino-psa-diag/archive/refs/heads/master.zip)
-j’ouvre le dossier arduino-psa-diag et je lance le fichier arduino-psa-diag.ino (en tant qu’admin)
- j’upload arduino-mcp2515.zip et ArduinoThread.zip en faisant Sketch-> include library -> Add zip…
-j’ai un Elegoo UNO R3 et Can Bus Shield 2.0 donc je change la valeur en 9 à la place du 10
- je clique sur compile et PAF : voir photo
J’ai installé java en dernière version, j’ai lancé le tout en admin, j’ai changé de chemin d’installation rien n’y fait ….
Pièces jointes
Actually , I also want to know this. Now I just ignore this icon on my dashboard .
7f317f appears to be an error code. I cannot find it in the arduino sketch Readme, though
Hello Raffo89 , can you tell me how you solve the problem with coding of ASS, I had the same situation like you:
| OK | |
| 5003 | |
| 622101A5 | |
| 5003 | |
| 7F3E03 | |
| 67037962CA52 | |
| 6704 | |
| 7F2E31 | |
| 7F2E31 | |
| 622101A5 |
Programming with ignition ON and engine off worked like a charm, in some situations. I was able to program the BSI.
BSI: Modify Zone 234C (Driver welcome): 00 > 01 (added option in NAC too)
BSI: Modify Zone 2300: 13 > 33 (Parking system type)
I carried out these operations successfully, and they work as usual.
Thank you for your time!
Dernière édition:
Hello Albatros24, can you help me with coding of DAE_BVH2,
When I read zone A0 :
>6B5:695
81
21A0 -> 61A005C0CD0002000001
I got this answer, so in this case can I use 34A00000000605C8FD000000E88A, or must be some different code?
Thanks
Yes, I have tried this code to disable STT successfully on
Peugeot 2008P24/308T9/3008P84/5008P87/508R8
Citrone C4P/C4GP/Berlingo
OPEL Mokka/Astra
But I am not using arduino tool for this purpose, I use the clone diagnostic tool from China , It's the same just a different tool.
Do you have a clone diagnostic tool from China for Diagbox using?
FYI,thanks.
Not yet because my car is for new paint . I have tried on older Citroen C5 from 2006 and there it's worked . On my 2009 I have change the BSI from Citroen C5 x7 2014 for rear camera and I don't have the CAN ID frame 0x120. Can you shame me the code sketch ? I have tried to PM to you
Hi
Thanks for your reply.
No I'm using Arduino and I have enabled various menus and options in NAC/CIROCCO but nothing in BSI or other ECUs. However, I think that the codes are the same and can be used in the console. When you say clone diagnostic, you mean the lexia clone, right ?
Have you tried other telecoding like HBA or Grip modes ?
Thanks in advance!
Hello.
It isn't a lie, if I told you I've searched all internet to solve this problem.
I bought and RCC radio (9833500080) and display from C3 Aircross (propably). Everything is OK, I can change VIN, but problem the problem is when I want to change calibration to 308 T9 ( 308_T9-9692810980.cal ). When I upload it it download and then ZL FLASH ERASING ERROR ( Picture nr 1) .
When I try diffrent calibration ( diffrent to 308 or to diffrent car) it's saying Calibration file Invalid, but sometimes is everything okay and the calibration will update without problem ( 5008_P87E-9693020580 ). Have someone had identical problem? Can you please help me?
It isn't a lie, if I told you I've searched all internet to solve this problem.
I bought and RCC radio (9833500080) and display from C3 Aircross (propably). Everything is OK, I can change VIN, but problem the problem is when I want to change calibration to 308 T9 ( 308_T9-9692810980.cal ). When I upload it it download and then ZL FLASH ERASING ERROR ( Picture nr 1) .
When I try diffrent calibration ( diffrent to 308 or to diffrent car) it's saying Calibration file Invalid, but sometimes is everything okay and the calibration will update without problem ( 5008_P87E-9693020580 ). Have someone had identical problem? Can you please help me?
Pièces jointes
No, I only have a calibration file for NAC W2 & W4 for 308 T9
Il not sure that à RCC calibration file for this car exists...
Maybe I'm wrong, but there are also different versions of WAVE in RCC, for example the calibrations in the VLUD repository for RCC 308 T9 start with 9692 and the one that does let you install 5008_P87E-9693020580 starts with 9693, so it would be for RCC WAVE3. If you have a WAVE 3 and you try to load a calibration that is for a different RCC, that may be your problem. Try to load calibrations that start with 9693 and try again.
If I'm wrong, someone who knows more about the subject can correct me.
salut j’ai un problème mon angle mort ne marche pas apres avoir fait l’activation de drive assist
salut tu peux m’aider svp j’ai une peugeot 3008 Gt 2021 Diesel Eat 8 j’ai eu un problème après avoir fait la procedure de Drive Assist l’angle mort ne marche plus quand je met On ca reviens sur OFF
Here is log from flashing 308 t9 unit 9692. I don't understand it but maybe you can help me.
может у кого есть фотографии блоков предохранителей и реле с названием их назначения для peugeot 5008 2G 2020 1.5 bluehdi DV5R
quelqu'un peut-il avoir des photos des boîtes à fusibles et des relais avec le nom de leur destination pour peugeot 5008 2G 2020 1.5 bluehdi DV5R
quelqu'un peut-il avoir des photos des boîtes à fusibles et des relais avec le nom de leur destination pour peugeot 5008 2G 2020 1.5 bluehdi DV5R
Discussions similaires
