[TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

[Hallahub]

hi guy,
this week i change my C4 for an e-2008 GTl line. it' s asome.
And the best part, it already has the NAC and dash

But when i picked up the car it did not have adaptive cruise control.
Is has normal cruise and emergency brake assist. Dealer says it cannot be changed.

does anyone have the same version and succesfully activated (with vlud tool or Diagtools) the adaptive cruise control?

I did this on a 208 gt line. I used diagbox to telecode: BSI, engine ecu, CVM, Radar and ESP.

 

[Ringelberg]

Nice,
you did it with an other VIN?

 

[Berk Morkoc]

les gars, il ne suffit pas d'activer l'assistant de feux de route sur 2109 pour avoir la fonctionnalité. Il permet l'apparition de la fonctionnalité dans le système multimédia mais il ne permet pas de passer de l'arrêt à l'activation. Que faut-il faire d'autre pour l'activer correctement ? Merci

@VLud avez-vous une idée de ce qu'il faut faire?

En:

guys, it is not enough to activate the high beam assistant on 2109 to have the functionality. It allows the functionality to appear in the multimedia system, but it does not allow switching from off to on. What else must be done to activate it correctly? Thank you

[USER = 108646] @VLud [/ USER] do you have any idea what to do?

 

[Roberto80]

Hi Guys,

I've just turned on the AA CP functions in my RCC Wave 2.1 and I have icons on menu but I can only connect with CP. When I try connect with AA my phone doesn't respond. I receive only information about connection with MirrorLink. I upgraded software from 073C to 076C and I still can't connect with AA. Any ideas?

Hi,
I'm still fighting with my RCC Wave 2 and AdnroidAuto. I tryed everything - turned off AA and Miror Link, Turned on only AA but still I receive this mesage. I didn't find any options in RCC phone settings to set this. Is enybody who had this problem and solved it? My ideas was end

 

[Miguel Angel]

[QUOTE = "Berk Morkoc, post: 2639447, member: 139700"] amigos, no es suficiente activar el asistente de luces altas en 2109 para tener la funcionalidad. Permite que la funcionalidad aparezca en el sistema multimedia, pero no permite cambiar de parada a activación. ¿Qué más se debe hacer para activarlo correctamente? Gracias

[USER = 108646] @VLud [/ USER] ¿tienes alguna idea de qué hacer?

En:

chicos, no es suficiente activar el asistente de luces altas en 2109 para tener la funcionalidad. Permite que la funcionalidad aparezca en el sistema multimedia, pero no permite cambiar de apagado a encendido. ¿Qué más se debe hacer para activarlo correctamente? Gracias

[USER = 108646] [USER = 108646] @VLud [/ USER] [/ USER] ¿tienes alguna idea de qué hacer? [/ QUOTE]
To have the low / high beam change it is necessary to have the cvm camera on the windshield

 

[Berk Morkoc]

[QUOTE = "Miguel Angel, post: 2639490, member: 129980"] [QUOTE = "Berk Morkoc, post: 2639447, member: 139700"] amigos, no es suficiente activar el asistente de luces altas in 2109 para tener la funcionalidad. Permit that the funcionalidad aparezca en el sistema multimedia, pero no permite cambiar de parada a activación. ¿Qué más se debe hacer para activarlo correctamente? Gracias

[USER = 108646] [USER = 108646] [USER = 108646] @VLud [/ USER] [/ USER] [/ USER] ¿tienes alguna idea to qué hacer?

In:

chicos, no es suficiente activar el asistente de luces altas in 2109 para tener la funcionalidad. Permit that the funcionalidad aparezca en el sistema multimedia, pero no permite cambiar de apagado a encendido. ¿Qué más se debe hacer para activarlo correctamente? Gracias

[USER = 108646] [USER = 108646] [USER = 108646] [USER = 108646] @VLud [/ USER] [/ USER] [/ USER] [/ USER] ¿tienes alguna idea to qué hacer? [/ QUOTE]
To have the low / high beam change it is necessary to have the cvm camera on the windshield [/ QUOTE]


I have CVM camera located on the windshield and it also has lane assist functionality that is already activated by the manufacturer. My car is C5 Aircross Feel Adventure.

 

[Berk Morkoc]

@VLud @marcins Could you please show me a way to activate automatic high/low beam feature on C5 aircross? I have CVM and lane assist feature activated by the manufacturer.

 

[cote_de_boeuf]

Hello la tribu, je vais pas y aller pas 4 chemins.... Je procède un TOYOTA Proace verso équipé d'un NAC WAVE 2. J'ai essayé d'activer le carplay Via diabox mais je n'ai pas réussi a activer l'option. Les champs sont bien présents mais ne sont pas modifiable....
Je cherche donc quelqu'un qui pourrait m'aider à activer l'option. Merci davance

 

[Berk Morkoc]

Any of you know what data fields the zone 2326 has in type of XX?

 

[von Bothmer]

@VLud

I bought this a year ago, will it work?

https://www.seeedstudio.com/CANBed-...mega32U4-with-MCP2515-and-MCP2551-p-4365.html

I am unsure if something is needed for the 120 Ohm resistor?

 

[nabil2106]

@Albatros24 I just tried to rewrite the same value inside 2101 zone. Everything went fine.
>75D:65D
-> 1003
-> :B6F0:03:03
-> 2E210115077007451C0C
AAS replies with 6E2101

Hello @Hallahub
I’m always looking to activate the park assist in my E-208, can you please tell if you have a E-208 also or a thermal version ?

the configuration of your AAS ECU is quite similar to mine : you have 15077007451C0C and I have 11077007450D4C.

I’m looking for a AAS and DAE activation.

 

[Hallahub]

Hello @Hallahub
I’m always looking to activate the park assist in my E-208, can you please tell if you have a E-208 also or a thermal version ?

the configuration of your AAS ECU is quite similar to mine : you have 15077007451C0C and I have 11077007450D4C.

I’m looking for a AAS and DAE activation.

I have thermal, btw my AAS is configured for park assist and active blind spot monitoring, the car shows me an approaching vehicle by the LED into the mirror and correct the trajectory if I try to overtake someone. Maybe the difference is that you are missing the active blind spot and you just have blind spot, that’s why the 2 configuration are very similar but not identical.

 

[nabil2106]

For sure I have blind spot but don’t know if I have “the active” version (i have 2 button bellow the wheel for information)

what about the zone 2101 in your DAE ECU ? You have the same configuration than me or similar “03CFF7EFFFFEFFFFFFFEFFFBFFFFFF“ ?

 

[marcins]

Hello @Hallahub
I’m always looking to activate the park assist in my E-208, can you please tell if you have a E-208 also or a thermal version ?

the configuration of your AAS ECU is quite similar to mine : you have 15077007451C0C and I have 11077007450D4C.

I’m looking for a AAS and DAE activation.

in AAS there also zones 0100 0102 0103 to configure...

 

[nabil2106]

Thank you Marcins for your reply.

For 0100 zone I have :
620100010109A02263

for 0102 I have
62010221200C0B8C8D010168000001050052

And for 0103 I have
6201030F0A02410306000014000005000200050A04001E00322814000A081E0F0A2A00A73C322D013A323702010A02053C02000000000032200C32024651680F2D03757700000A1E0A1ECA1E2700090A2390810ACA22530209030800

I hope that you can tell me more with this information

 

[marcins]

Thank you Marcins for your reply.

For 0100 zone I have :
620100010109A02263

for 0102 I have
62010221200C0B8C8D010168000001050052

And for 0103 I have
6201030F0A02410306000014000005000200050A04001E00322814000A081E0F0A2A00A73C322D013A323702010A02053C02000000000032200C32024651680F2D03757700000A1E0A1ECA1E2700090A2390810ACA22530209030800

I hope that you can tell me more with this information

That's the problem specyfic car have differ config, without reading from car have this enabled you can't be sure what to change

 

[nabil2106]

I see..

maybe if @Hallahub have the same ECUs than me and if he have time to share his configuration, we can see more clear

 

[marcins]

@nabil2106 @Hallahub posted you that's changes need to be made in BSI, engine ecu, CVM, Radar and ESP don't think anyone would take responsibility to mess your car when something goes wrong.... and this thread is for telecoding
NAC / RCC / CIROCCO

 

[nabil2106]

I will take the safe way, I will change the BSI and the NAC config as before and retry maybe one day with diagbox...
Thank you for your patience

 

[Berk Morkoc]

What are the addresses of the zones in CVM ecu?

 

[marcins]

What are the addresses of the zones in CVM ecu?

2101

 

[Berk Morkoc]

2101

Do you know what it is used for?

 

[just4u32]

THIS IS INCREDIBLE!

Sorry for writing in English, but this is exactly what I wanted to ask
Is it possible for anyone to provide assistance in English? Google translate does an OK job, but since this is my first rodeo with Arduino, I'd really appreciate if there would be someone that doesn't mind helping me instead of me writing in English here.

I have RCC and what I want to achieve is park assist and some lightning options (i-amplify).
I couldn't find a list of what's possible anywhere, and the program appears to be in French.

Thanks a lot and keep up the great work!

 

[Lusitanos67]

@VLud ,

J'ai noté plusieurs choses pour corrections/infos:
- la zone 2113 et 2108 sont en doubles lors d'un backup avec l'appli.
- la clim est automatiquement activée lors de l'activation via l'écran tactile de la fonction "mono", et je n'avais pas cela auparavant.


Merci

 

[alexkbr]

Bonjour à tous! Pouvez-vous s'il vous plaît me dire qui a déjà des fichiers d'étalonnage pour le réglage sous 308 T7?

 

[Poncla]

Hi,
I would like to know if with the Arduino method I can telecode the tailgate control unit.
I replaced it but with diagbox I don't succeed.
Thanks

 

[Laleksss]

Peugeot 508 first gen. Nac + Cirocco - done Thank you guys for a lot of information, an thank you Vlud for your software!

Video:

And photo:


More photos is here: https://www.drive2.ru/l/597278631659585595/

 

[W1zard]

@Laleksss Great job with the molding the dashboard!
Can you help me with Webasto? I saw you have configuration for it in the APPs menu. I managed to enable the menu, but it is not working.
What in addition I have to do in order to have it working

Thanks!

 

[Laleksss]

@Laleksss Great job with the molding the dashboard!
Can you help me with Webasto? I saw you have configuration for it in the APPs menu. I managed to enable the menu, but it is not working.
What in addition I have to do in order to have it working

Thanks!

You need to do two things:
1. Write eeprom flie to your lcd and install lcd to the car. After that you need to check how it's working - it need to save current screen after shutdown of the car and wake it up again, also all screens must looks like at screenshots attached to the my post (excl. cruise). If all okay, go to the pt.2
2.Go to BSI - driving comfort and set "Presence and type of thermal preconditions" - internal heat precondition with matrix... and 'presence and type of air heater' - additional heater and heat pre-condition
After that all will start woking. (but not on the NAC))))

 

[W1zard]

[QUOTE = "Laleksss, post: 2641240, member: 117405"] You need to do two things:
1. Write eeprom flie to your lcd and install lcd to the car. After that you need to check how it's working - it need to save current screen after shutdown of the car and wake it up again, also all screens must looks like at screenshots attached to the my post (excl. Cruise). If all okay, go to the pt.2
2.Go to BSI - driving comfort and set "Presence and type of thermal preconditions" - internal heat precondition with matrix ... and 'presence and type of air heater' - additional heater and heat pre-condition
After that all will start woking. (but not on the NAC)))) [/ QUOTE]
Hi, I have the Webasto working on the LCD (mini LCD between rev counter and speedometer).
I asked if it is possible to be programmed when you install NAC.