There are 2 sets of line when in the revers camera. ( active lines of my 360 view. and static lines from the CIROCCO, same for 360 view)
also the CIROCCO does not dim when i turn on the lights. ( the NAC does) so i need sun glases in the dark
Hi yes. I tryed. but no luck. See picture. The lines stay in the top screen. and the NAC shows a warning.
i think the problem is in the top display.
Voir la pièce jointe 16449
Hi @Ringelberg,
at post # 638 I shared the NAC configuration file of a C4GP with Vision 360 and ParkAssist tries to compare it with your configuration, maybe you can find a solution.
In the NAC configuration file, zone 2106 is set as follows:
2106 = 30
I believe that all three items must be enabled.
Si tu as bien le lecteur vidéo (NAC Wave4 double LVDS + DAB) désactiver "Fonction de restriction du conducteur" en zone 2108 devrait permettre le Video In Motion
so problem 1 fixed. no more extra lines.
Voir la pièce jointe 16475
but i like to get a dump of the display and try to change some settings. anybody wants to help out?
Are they not accessible or you can't access manual coding?Hi @James78,
Yes
I needed to reprogram the display with diagbox and a VIN to use autotelecoding.
the VIN needed to have the option: "WITH PANORAMIC VISUAL AID" and then the display does not show the lines.
There are tons of settings that are posible to change in the display. but no acces
some can't be changed manualy. Some cant even been seen.Are they not accessible or you can't access manual coding?
Do you mean Diagbox? Do I need access to PSA server to do this?Just change the setting by telecoding the screen, you can't do this from the NAC.
Could you please share your dump i like to see thatBy modifying the dump I was able to activate something
Voir la pièce jointe 16125 Voir la pièce jointe 16126 Voir la pièce jointe 16127
@James78 : The folder of the .exe must be writable and you must close what you use to check the logs while using the program (I had these errors when the .log file was opened in Notepad++)
Calibration changing using the bench Arduino sketch can be hazardous because of big frames slowing down the sending of mandatory frames to keep the NAC powered.
Mise à jour 1.1.4 en ligne, règle le problème de calibration d'un RCC