I am also interesting programming BSI in canbus2010.interesting anything for older BSI used in cars 2013-2017 N0x Q0x
In particular, I want change vin in my BSI module for activating online service in NAC wave2
I am also interesting programming BSI in canbus2010.interesting anything for older BSI used in cars 2013-2017 N0x Q0x
There is no way to do it, just take the code of that calibration and compare those on github, if there is one like it you can easily load itAnybody knows how can I download calibration file from working nac to my NAC.
Hi @Miguel Angel, I am also preparing the upgrade from SMEG to NAC for my C4P. As @VLud says, the instrument clusters, even if externally identical, differ in the hardware. For example, the pinout of the internal connector of the motherboard and the LCD panel also changes. For km you can unsolder the eeprom, ST95160, extract the dump with an eeprom reader and modify the dump on lines 480-490 with the desired number of km with a Hex editor. I did it with my instrument panel and it worked. On the net there are several sites that modify the dump for free. I am attaching a photo of the eeprom.
Yes, I use this tool board, but you will need to change the Arduino sketch to use the Leonardo CAN-bus's pins. If its the hobbytronics board CS is pin 17 and 16mhz crystal. The sparkfun DB9 cable (and most obd to db9 cables) don't have pins 3 and 8 connected on the OBD, so what I did was buy an OBD extension cable and cut the wires i needed directly to the board.heloo i am new to the forum and it is an honor to be here i wanted to ask if the arduino leonardo can-bus is an alternative with an obd2 to db9 cable that will work with the peugeot 3008 gt 2020 line for the telecoding?
Salut Vlud , j'ai essayé de te parler via le post que tu as crée avec le tuto pour la passerelle CAN 2004 / 2010 , j'ai 2 / 3 questions a te poser si tu es dispo pour continué sur l'autre topic vu que je ne peux pas t'envoyer de message privé .Use an original 180° camera ( 98 093 010 80 ) or don't enable Visiopark
Can you help me about calibration download to my NAC by remotely. Or anybody knows how can do this myself. I can pay fee for this.
@levanid : You are right, there is a issue on Wave3 some bytes slightly moved so we had to make a small hack
I am also interesting programming BSI in canbus2010.
In particular, I want change vin in my BSI module for activating online service in NAC wave2
Hi. Someone who has the CVM multifunctional camera can send me their config file (.nac) I need to see the addresses 2101 and 2109. I am trying to add the camera on my C4 Picasso and I cannot configure the automatic lighting of high beams, I can't get it exit menu at nac.
@VLud, any way to configure the BSI with the arduino?
in 2127 for headlight dippingDo you remember where in the app i can disable feature "Automatic headlight dipping"? I have searched it two times but i didn't found.
Voir la pièce jointe 17912
And where i can enable "Connected apps" in the menu with AA, Apple Car and Mirror Link? There is currently no icon for it.
Thanks
What you mean by this?conected apps need check with nac
He won't work if you have a simple bsi2010, he will only work properly if you have bsi2010-evo@RuLe can you share a dump of cirocco with active boost guage? menu
Thanks for your reply. Can you give more details about it?Yes possible, everything you need is on github , tested with N03 so far , need test with locked one HW
He won't work if you have a simple bsi2010, he will only work properly if you have bsi2010-evo
Wanna fit One of those clusters on my 308 2016 with NAC. Its possible?BSI N03
willbe fitted into my 208Gti
Hallo!Hallo aus österreich,
Ich lese in diesem Forum für ein paar Wochen (mit Google Übersetzer) und bin erfahren von der Kompetenz !!
In meinem 2016 Peugeot 308 T9 Blau HDI mit SMEG + möchte ich ein Upgrade auf NAC (Gerät wird in 2 Wochen gekauft). Es wurden die richtigen Einstellungen vorgenommen, aber ich bin nicht sicher, ob meine Anweisungen 130-Grad-Kamera richtig funktioniert. Ich habe das Arduino (Original Arduino Uni Rev. 3.0) wie programmiert und warte jetzt auf mein MCP 2515 Modul (dieses Modul ).
Meine Frage ist: Die Whitch-Parameter müssen werden, damit meine gehört 130-Grad-Kamera korrigiert wird
Mit freundlichen Grüßen aus Österreich / Steiermark
That's correct!Thanks for your answer (have understood your german well !!), If i understand right, it´s possible to get the camera working in the NAC by changing values in 2 zones. When i´ve mounted it, i´ll give you feedback (NAC arrives in the next 2 weeks), in the meantime i´ll complete my case for the arduino. in future I´ll post in english for better understanding (because my french isn´t the best)
best regards from autriche