You can make it work (= usable) we never said it was optimal because icons will be missing no matter what you do.
You can't convert a HD unit to SD unit, even the hard way. Bootloader is different between the two and it is signed.
Why you need chinese lang?
I dont want chineese language but i want theme onlyWhy you need chinese lang?
@marcins Hello,Hello, how to activate src and menu button in NAC. I have same car but doesn't work.
You can make it work (= usable) we never said it was optimal because icons will be missing no matter what you do.
You can't convert a HD unit to SD unit, even the hard way. Bootloader is different between the two and it is signed.
Bonjour à tous.
Petite question : j'ai une écho terrible sur mon nac lors d'appels Bluetooth (W4, Peugeot 3008 P84, dernier firmware). J'ai bien tenté de remettre un fichier de calibration via arduino mais aucun changement.
Une idée ?
No luck, I`ve been reading that for some ECUs it won`t work, mine is no exception, my INJ ECU code is listed as supported in the app diclamer, but it will not connect to the ECU, it`s not detecting it. Other apps work fine, I have tried already with multiple OBD adaptors, from cheap to expensive, no luck, same story for everyone. Dev would not answer.FAP app amazon (full version) google play lite
No, the CIROCCO expects data from CVM not the NAC, no setting found yet to have the previous behavior like MATT (which can do both).
I have the same problem with my 5008. Diagbox eont let me enter into repair menu so I can not check the zones
Hey Friend. and how do you solve the problem with the radio? do you have an additional moodule? do you connect to pins other than 16/17?Interesting. Thanks!
Hey Friend. and how do you solve the problem with the radio? do you have an additional moodule? do you connect to pins other than 16/17?